Sets the trace name. The trace name appears as the legend item and on hover.

Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

Determines whether or not an item corresponding to this trace is shown in the legend.

Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc.

Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.

• font
  Parent: data[type=scatter].legendgrouptitle
  Type: named list containing one or more of the keys listed below.

  Sets this legend group's title font.

  • color
    Parent: data[type=scatter].legendgrouptitle.font
    Type: color
  • family
    Parent: data[type=scatter].legendgrouptitle.font
    Type: string

    HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

  • lineposition
    Parent: data[type=scatter].legendgrouptitle.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=scatter].legendgrouptitle.font
    Type: string
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=scatter].legendgrouptitle.font
    Type: number greater than or equal to 1
  • style
    Parent: data[type=scatter].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=scatter].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=scatter].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=scatter].legendgrouptitle.font
    Type: integer between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• text
  Parent: data[type=scatter].legendgrouptitle
  Type: string
  Default: ""

  Sets the title of the legend group.

Sets the width (in px or fraction) of the legend for this trace.

Sets the opacity of the trace.

Determines the drawing mode for this scatter trace. If the provided `mode` includes "text" then the `text` elements appear at the coordinates. Otherwise, the `text` elements appear on hover. If there are less than 20 points and the trace is not stacked then the default is "lines+markers". Otherwise, "lines".

Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

Sets the layer on which this trace is displayed, relative to other SVG traces on the same subplot. SVG traces with higher `zorder` appear in front of those with lower `zorder`.

Sets the x coordinates.

Alternate to `x`. Builds a linear space of x coordinates. Use with `dx` where `x0` is the starting coordinate and `dx` the step.

Sets the x coordinate step. See `x0` for more info.

Sets the y coordinates.

Alternate to `y`. Builds a linear space of y coordinates. Use with `dy` where `y0` is the starting coordinate and `dy` the step.

Sets the y coordinate step. See `y0` for more info.

Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

Sets the positions of the `text` elements with respects to the (x,y) coordinates.

Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: TRUE`) are available.

Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: TRUE`) are available. Anything contained in tag `<extra>` is displayed in the secondary box, for example "<extra>{fullData.name}</extra>". To hide the secondary box completely, use an empty tag `<extra></extra>`.

Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"By default the values are formatted using `xaxis.hoverformat`.

Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"By default the values are formatted using `yaxis.hoverformat`.

Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements

Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If "x" (the default value), the x coordinates refer to `layout.xaxis`. If "x2", the x coordinates refer to `layout.xaxis2`, and so on.

Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If "y" (the default value), the y coordinates refer to `layout.yaxis`. If "y2", the y coordinates refer to `layout.yaxis2`, and so on.

Only relevant in the following cases: 1. when `scattermode` is set to "group". 2. when `stackgroup` is used, and only the first `orientation` found in the `stackgroup` will be used - including if `visible` is "legendonly" but not if it is `FALSE`. Sets the stacking direction. With "v" ("h"), the y (x) values of subsequent traces are added. Also affects the default value of `fill`.

Only relevant when `stackgroup` is used, and only the first `groupnorm` found in the `stackgroup` will be used - including if `visible` is "legendonly" but not if it is `FALSE`. Sets the normalization for the sum of this `stackgroup`. With "fraction", the value of each trace at each location is divided by the sum of all trace values at that location. "percent" is the same but multiplied by 100 to show percentages. If there are multiple subplots, or multiple `stackgroup`s on one subplot, each will be normalized within its own set.

Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently.

Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up.

Set several scatter traces (on the same subplot) to the same stackgroup in order to add their y values (or their x values if `orientation` is "h"). If blank or omitted this trace will not be stacked. Stacking also turns `fill` on by default, using "tonexty" ("tonextx") if `orientation` is "h" ("v") and sets the default `mode` to "lines" irrespective of point count. You can only stack on a numeric (linear or log) axis. Traces in a `stackgroup` will only fill to (or be filled to) other traces in the same group. With multiple `stackgroup`s or some traces stacked and some not, if fill-linked traces are not already consecutive, the later ones will be pushed down in the drawing order.

Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M<n>" on the x axis. Special values in the form of "M<n>" could be used to declare the number of months. In this case `n` must be a positive integer.

Only relevant when the axis `type` is "date". Sets the alignment of data points on the x axis.

Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the x0 axis. When `x0period` is round number of weeks, the `x0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M<n>" on the y axis. Special values in the form of "M<n>" could be used to declare the number of months. In this case `n` must be a positive integer.

Only relevant when the axis `type` is "date". Sets the alignment of data points on the y axis.

Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the y0 axis. When `y0period` is round number of weeks, the `y0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

• angle
  Parent: data[type=scatter].marker
  Type: angle
  Default: 0

  Sets the marker angle in respect to `angleref`.

• angleref
  Parent: data[type=scatter].marker
  Type: enumerated , one of ( "previous" | "up" )
  Default: "up"

  Sets the reference for marker angle. With "previous", angle 0 points along the line from the previous point to this one. With "up", angle 0 points toward the top of the screen.

• autocolorscale
  Parent: data[type=scatter].marker
  Type: boolean
  Default: TRUE

  Determines whether the colorscale is a default palette (`autocolorscale: TRUE`) or the palette determined by `marker.colorscale`. Has an effect only if in `marker.color` is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is TRUE, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

• cauto
  Parent: data[type=scatter].marker
  Type: boolean
  Default: TRUE

  Determines whether or not the color domain is computed with respect to the input data (here in `marker.color`) or the bounds set in `marker.cmin` and `marker.cmax` Has an effect only if in `marker.color` is set to a numerical array. Defaults to `FALSE` when `marker.cmin` and `marker.cmax` are set by the user.

• cmax
  Parent: data[type=scatter].marker
  Type: number

  Sets the upper bound of the color domain. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color` and if set, `marker.cmin` must be set as well.

• cmid
  Parent: data[type=scatter].marker
  Type: number

  Sets the mid-point of the color domain by scaling `marker.cmin` and/or `marker.cmax` to be equidistant to this point. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color`. Has no effect when `marker.cauto` is `FALSE`.

• cmin
  Parent: data[type=scatter].marker
  Type: number

  Sets the lower bound of the color domain. Has an effect only if in `marker.color` is set to a numerical array. Value should have the same units as in `marker.color` and if set, `marker.cmax` must be set as well.

• color
  Parent: data[type=scatter].marker
  Type: color or array of colors

  Sets the marker color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `marker.cmin` and `marker.cmax` if set.

• coloraxis
  Parent: data[type=scatter].marker
  Type: subplotid

  Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

• colorbar
  Parent: data[type=scatter].marker
  Type: named list containing one or more of the keys listed below.
  • bgcolor
    Parent: data[type=scatter].marker.colorbar
    Type: color
    Default: "rgba(0,0,0,0)"

    Sets the color of padded area.

  • bordercolor
    Parent: data[type=scatter].marker.colorbar
    Type: color
    Default: "#444"

    Sets the axis line color.

  • borderwidth
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 0

    Sets the width (in px) or the border enclosing this color bar.

  • dtick
    Parent: data[type=scatter].marker.colorbar
    Type: number or categorical coordinate string

    Sets the step in-between ticks on this axis. Use with `tick0`. Must be a positive number, or special strings available to "log" and "date" axes. If the axis `type` is "log", then ticks are set every 10^(n"dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L<f>", where `f` is a positive number, gives ticks linearly spaced in value (but not position). For example `tick0` = 0.1, `dtick` = "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5). `tick0` is ignored for "D1" and "D2". If the axis `type` is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set `dtick` to 86400000.0. "date" also has special values "M<n>" gives ticks spaced by a number of months. `n` must be a positive integer. To set ticks on the 15th of every third month, set `tick0` to "2000-01-15" and `dtick` to "M3". To set ticks every 4 years, set `dtick` to "M48"

  • exponentformat
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "none" | "e" | "E" | "power" | "SI" | "B" )
    Default: "B"

    Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B.

  • labelalias
    Parent: data[type=scatter].marker.colorbar
    Type: number or categorical coordinate string

    Replacement text for specific tick or hover labels. For example using {US: 'USA', CA: 'Canada'} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html-like tags or MathJax.

  • len
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 1

    Sets the length of the color bar This measure excludes the padding of both ends. That is, the color bar length is this length minus the padding on both ends.

  • lenmode
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "fraction" | "pixels" )
    Default: "fraction"

    Determines whether this color bar's length (i.e. the measure in the color variation direction) is set in units of plot "fraction" or in "pixels. Use `len` to set the value.

  • minexponent
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 3

    Hide SI prefix for 10^n if |n| is below this number. This only has an effect when `tickformat` is "SI" or "B".

  • nticks
    Parent: data[type=scatter].marker.colorbar
    Type: integer greater than or equal to 0
    Default: 0

    Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to `nticks`. Has an effect only if `tickmode` is set to "auto".

  • orientation
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "h" | "v" )
    Default: "v"

    Sets the orientation of the colorbar.

  • outlinecolor
    Parent: data[type=scatter].marker.colorbar
    Type: color
    Default: "#444"

    Sets the axis line color.

  • outlinewidth
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 1

    Sets the width (in px) of the axis line.

  • separatethousands
    Parent: data[type=scatter].marker.colorbar
    Type: boolean

    If "TRUE", even 4-digit integers are separated

  • showexponent
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear.

  • showticklabels
    Parent: data[type=scatter].marker.colorbar
    Type: boolean
    Default: TRUE

    Determines whether or not the tick labels are drawn.

  • showtickprefix
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden.

  • showticksuffix
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "all" | "first" | "last" | "none" )
    Default: "all"

    Same as `showtickprefix` but for tick suffixes.

  • thickness
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 30

    Sets the thickness of the color bar This measure excludes the size of the padding, ticks and labels.

  • thicknessmode
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "fraction" | "pixels" )
    Default: "pixels"

    Determines whether this color bar's thickness (i.e. the measure in the constant color direction) is set in units of plot "fraction" or in "pixels". Use `thickness` to set the value.

  • tick0
    Parent: data[type=scatter].marker.colorbar
    Type: number or categorical coordinate string

    Sets the placement of the first tick on this axis. Use with `dtick`. If the axis `type` is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the `tick0` to 2) except when `dtick`="L<f>" (see `dtick` for more info). If the axis `type` is "date", it should be a date string, like date data. If the axis `type` is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears.

  • tickangle
    Parent: data[type=scatter].marker.colorbar
    Type: angle
    Default: "auto"

    Sets the angle of the tick labels with respect to the horizontal. For example, a `tickangle` of -90 draws the tick labels vertically.

  • tickcolor
    Parent: data[type=scatter].marker.colorbar
    Type: color
    Default: "#444"

    Sets the tick color.

  • tickfont
    Parent: data[type=scatter].marker.colorbar
    Type: named list containing one or more of the keys listed below.

    Sets the color bar's tick label font

    • color
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: color
    • family
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: string

      HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

    • lineposition
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
      Examples: "under", "over", "under+over", "under+over+through", "none"
      Default: "none"

      Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

    • shadow
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: string
      Default: "none"

      Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

    • size
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: number greater than or equal to 1
    • style
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: enumerated , one of ( "normal" | "italic" )
      Default: "normal"

      Sets whether a font should be styled with a normal or italic face from its family.

    • textcase
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
      Default: "normal"

      Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

    • variant
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
      Default: "normal"

      Sets the variant of the font.

    • weight
      Parent: data[type=scatter].marker.colorbar.tickfont
      Type: integer between or equal to 1 and 1000
      Default: normal

      Sets the weight (or boldness) of the font.

  • tickformat
    Parent: data[type=scatter].marker.colorbar
    Type: string
    Default: ""

    Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"

  • tickformatstops
    Parent: data[type=scatter].marker.colorbar
    Type: list of named list where each named list has one or more of the keys listed below.
    • dtickrange
      Parent: data[type=scatter].marker.colorbar.tickformatstops[]
      Type: list

      range ["min", "max"], where "min", "max" - dtick values which describe some zoom level, it is possible to omit "min" or "max" value by passing "null"

    • enabled
      Parent: data[type=scatter].marker.colorbar.tickformatstops[]
      Type: boolean
      Default: TRUE

      Determines whether or not this stop is used. If `FALSE`, this stop is ignored even within its `dtickrange`.

    • name
      Parent: data[type=scatter].marker.colorbar.tickformatstops[]
      Type: string

      When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with `templateitemname` matching this `name` alongside your modifications (including `visible: FALSE` or `enabled: FALSE` to hide it). Has no effect outside of a template.

    • templateitemname
      Parent: data[type=scatter].marker.colorbar.tickformatstops[]
      Type: string

      Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with `templateitemname` matching its `name`, alongside your modifications (including `visible: FALSE` or `enabled: FALSE` to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with `visible: TRUE`.

    • value
      Parent: data[type=scatter].marker.colorbar.tickformatstops[]
      Type: string
      Default: ""

      string - dtickformat for described zoom level, the same as "tickformat"

  • ticklabeloverflow
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "allow" | "hide past div" | "hide past domain" )

    Determines how we handle tick labels that would overflow either the graph div or the domain of the axis. The default value for inside tick labels is "hide past domain". In other cases the default is "hide past div".

  • ticklabelposition
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "outside" | "inside" | "outside top" | "inside top" | "outside left" | "inside left" | "outside right" | "inside right" | "outside bottom" | "inside bottom" )
    Default: "outside"

    Determines where tick labels are drawn relative to the ticks. Left and right options are used when `orientation` is "h", top and bottom when `orientation` is "v".

  • ticklabelstep
    Parent: data[type=scatter].marker.colorbar
    Type: integer greater than or equal to 1
    Default: 1

    Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled. `tick0` determines which labels are shown. Not implemented for axes with `type` "log" or "multicategory", or when `tickmode` is "array".

  • ticklen
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 5

    Sets the tick length (in px).

  • tickmode
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "auto" | "linear" | "array" )

    Sets the tick mode for this axis. If "auto", the number of ticks is set via `nticks`. If "linear", the placement of the ticks is determined by a starting position `tick0` and a tick step `dtick` ("linear" is the default value if `tick0` and `dtick` are provided). If "array", the placement of the ticks is set via `tickvals` and the tick text is `ticktext`. ("array" is the default value if `tickvals` is provided).

  • tickprefix
    Parent: data[type=scatter].marker.colorbar
    Type: string
    Default: ""

    Sets a tick label prefix.

  • ticks
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "outside" | "inside" | "" )
    Default: ""

    Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines.

  • ticksuffix
    Parent: data[type=scatter].marker.colorbar
    Type: string
    Default: ""

    Sets a tick label suffix.

  • ticktext
    Parent: data[type=scatter].marker.colorbar
    Type: dataframe column, list, vector

    Sets the text displayed at the ticks position via `tickvals`. Only has an effect if `tickmode` is set to "array". Used with `tickvals`.

  • tickvals
    Parent: data[type=scatter].marker.colorbar
    Type: dataframe column, list, vector

    Sets the values at which ticks on this axis appear. Only has an effect if `tickmode` is set to "array". Used with `ticktext`.

  • tickwidth
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 1

    Sets the tick width (in px).

  • title
    Parent: data[type=scatter].marker.colorbar
    Type: named list containing one or more of the keys listed below.
    • font
      Parent: data[type=scatter].marker.colorbar.title
      Type: named list containing one or more of the keys listed below.

      Sets this color bar's title font. Note that the title's font used to be set by the now deprecated `titlefont` attribute.

      • color
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: color
      • family
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: string

        HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

      • lineposition
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
        Examples: "under", "over", "under+over", "under+over+through", "none"
        Default: "none"

        Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

      • shadow
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: string
        Default: "none"

        Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

      • size
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: number greater than or equal to 1
      • style
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: enumerated , one of ( "normal" | "italic" )
        Default: "normal"

        Sets whether a font should be styled with a normal or italic face from its family.

      • textcase
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
        Default: "normal"

        Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

      • variant
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
        Default: "normal"

        Sets the variant of the font.

      • weight
        Parent: data[type=scatter].marker.colorbar.title.font
        Type: integer between or equal to 1 and 1000
        Default: normal

        Sets the weight (or boldness) of the font.

    • side
      Parent: data[type=scatter].marker.colorbar.title
      Type: enumerated , one of ( "right" | "top" | "bottom" )

      Determines the location of color bar's title with respect to the color bar. Defaults to "top" when `orientation` if "v" and defaults to "right" when `orientation` if "h". Note that the title's location used to be set by the now deprecated `titleside` attribute.

    • text
      Parent: data[type=scatter].marker.colorbar.title
      Type: string

      Sets the title of the color bar. Note that before the existence of `title.text`, the title's contents used to be defined as the `title` attribute itself. This behavior has been deprecated.

  • x
    Parent: data[type=scatter].marker.colorbar
    Type: number

    Sets the x position with respect to `xref` of the color bar (in plot fraction). When `xref` is "paper", defaults to 1.02 when `orientation` is "v" and 0.5 when `orientation` is "h". When `xref` is "container", defaults to "1" when `orientation` is "v" and 0.5 when `orientation` is "h". Must be between "0" and "1" if `xref` is "container" and between "-2" and "3" if `xref` is "paper".

  • xanchor
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "left" | "center" | "right" )

    Sets this color bar's horizontal position anchor. This anchor binds the `x` position to the "left", "center" or "right" of the color bar. Defaults to "left" when `orientation` is "v" and "center" when `orientation` is "h".

  • xpad
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 10

    Sets the amount of padding (in px) along the x direction.

  • xref
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "container" | "paper" )
    Default: "paper"

    Sets the container `x` refers to. "container" spans the entire `width` of the plot. "paper" refers to the width of the plotting area only.

  • y
    Parent: data[type=scatter].marker.colorbar
    Type: number

    Sets the y position with respect to `yref` of the color bar (in plot fraction). When `yref` is "paper", defaults to 0.5 when `orientation` is "v" and 1.02 when `orientation` is "h". When `yref` is "container", defaults to 0.5 when `orientation` is "v" and 1 when `orientation` is "h". Must be between "0" and "1" if `yref` is "container" and between "-2" and "3" if `yref` is "paper".

  • yanchor
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "top" | "middle" | "bottom" )

    Sets this color bar's vertical position anchor This anchor binds the `y` position to the "top", "middle" or "bottom" of the color bar. Defaults to "middle" when `orientation` is "v" and "bottom" when `orientation` is "h".

  • ypad
    Parent: data[type=scatter].marker.colorbar
    Type: number greater than or equal to 0
    Default: 10

    Sets the amount of padding (in px) along the y direction.

  • yref
    Parent: data[type=scatter].marker.colorbar
    Type: enumerated , one of ( "container" | "paper" )
    Default: "paper"

    Sets the container `y` refers to. "container" spans the entire `height` of the plot. "paper" refers to the height of the plotting area only.

• colorscale
  Parent: data[type=scatter].marker
  Type: colorscale

  Sets the colorscale. Has an effect only if in `marker.color` is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.cmin` and `marker.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

• gradient
  Parent: data[type=scatter].marker
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=scatter].marker.gradient
    Type: color or array of colors

    Sets the final color of the gradient fill: the center color for radial, the right for horizontal, or the bottom for vertical.

  • type
    Parent: data[type=scatter].marker.gradient
    Type: enumerated or array of enumerateds , one of ( "radial" | "horizontal" | "vertical" | "none" )
    Default: "none"

    Sets the type of gradient used to fill the markers

• line
  Parent: data[type=scatter].marker
  Type: named list containing one or more of the keys listed below.
  • autocolorscale
    Parent: data[type=scatter].marker.line
    Type: boolean
    Default: TRUE

    Determines whether the colorscale is a default palette (`autocolorscale: TRUE`) or the palette determined by `marker.line.colorscale`. Has an effect only if in `marker.line.color` is set to a numerical array. In case `colorscale` is unspecified or `autocolorscale` is TRUE, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed.

  • cauto
    Parent: data[type=scatter].marker.line
    Type: boolean
    Default: TRUE

    Determines whether or not the color domain is computed with respect to the input data (here in `marker.line.color`) or the bounds set in `marker.line.cmin` and `marker.line.cmax` Has an effect only if in `marker.line.color` is set to a numerical array. Defaults to `FALSE` when `marker.line.cmin` and `marker.line.cmax` are set by the user.

  • cmax
    Parent: data[type=scatter].marker.line
    Type: number

    Sets the upper bound of the color domain. Has an effect only if in `marker.line.color` is set to a numerical array. Value should have the same units as in `marker.line.color` and if set, `marker.line.cmin` must be set as well.

  • cmid
    Parent: data[type=scatter].marker.line
    Type: number

    Sets the mid-point of the color domain by scaling `marker.line.cmin` and/or `marker.line.cmax` to be equidistant to this point. Has an effect only if in `marker.line.color` is set to a numerical array. Value should have the same units as in `marker.line.color`. Has no effect when `marker.line.cauto` is `FALSE`.

  • cmin
    Parent: data[type=scatter].marker.line
    Type: number

    Sets the lower bound of the color domain. Has an effect only if in `marker.line.color` is set to a numerical array. Value should have the same units as in `marker.line.color` and if set, `marker.line.cmax` must be set as well.

  • color
    Parent: data[type=scatter].marker.line
    Type: color or array of colors

    Sets the marker.line color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to `marker.line.cmin` and `marker.line.cmax` if set.

  • coloraxis
    Parent: data[type=scatter].marker.line
    Type: subplotid

    Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis.

  • colorscale
    Parent: data[type=scatter].marker.line
    Type: colorscale

    Sets the colorscale. Has an effect only if in `marker.line.color` is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `marker.line.cmin` and `marker.line.cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blackbody,Bluered,Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

  • reversescale
    Parent: data[type=scatter].marker.line
    Type: boolean

    Reverses the color mapping if TRUE. Has an effect only if in `marker.line.color` is set to a numerical array. If TRUE, `marker.line.cmin` will correspond to the last color in the array and `marker.line.cmax` will correspond to the first color.

  • width
    Parent: data[type=scatter].marker.line
    Type: number or array of numbers greater than or equal to 0

    Sets the width (in px) of the lines bounding the marker points.

• maxdisplayed
  Parent: data[type=scatter].marker
  Type: number greater than or equal to 0
  Default: 0

  Sets a maximum number of points to be drawn on the graph. "0" corresponds to no limit.

• opacity
  Parent: data[type=scatter].marker
  Type: number or array of numbers between or equal to 0 and 1

  Sets the marker opacity.

• reversescale
  Parent: data[type=scatter].marker
  Type: boolean

  Reverses the color mapping if TRUE. Has an effect only if in `marker.color` is set to a numerical array. If TRUE, `marker.cmin` will correspond to the last color in the array and `marker.cmax` will correspond to the first color.

• showscale
  Parent: data[type=scatter].marker
  Type: boolean

  Determines whether or not a colorbar is displayed for this trace. Has an effect only if in `marker.color` is set to a numerical array.

• size
  Parent: data[type=scatter].marker
  Type: number or array of numbers greater than or equal to 0
  Default: 6

  Sets the marker size (in px).

• sizemin
  Parent: data[type=scatter].marker
  Type: number greater than or equal to 0
  Default: 0

  Has an effect only if `marker.size` is set to a numerical array. Sets the minimum size (in px) of the rendered marker points.

• sizemode
  Parent: data[type=scatter].marker
  Type: enumerated , one of ( "diameter" | "area" )
  Default: "diameter"

  Has an effect only if `marker.size` is set to a numerical array. Sets the rule for which the data in `size` is converted to pixels.

• sizeref
  Parent: data[type=scatter].marker
  Type: number
  Default: 1

  Has an effect only if `marker.size` is set to a numerical array. Sets the scale factor used to determine the rendered size of marker points. Use with `sizemin` and `sizemode`.

• standoff
  Parent: data[type=scatter].marker
  Type: number or array of numbers greater than or equal to 0
  Default: 0

  Moves the marker away from the data point in the direction of `angle` (in px). This can be useful for example if you have another marker at this location and you want to point an arrowhead marker at it.

• symbol
  Parent: data[type=scatter].marker
  Type: enumerated or array of enumerateds , one of ( "0" | "0" | "circle" | "100" | "100" | "circle-open" | "200" | "200" | "circle-dot" | "300" | "300" | "circle-open-dot" | "1" | "1" | "square" | "101" | "101" | "square-open" | "201" | "201" | "square-dot" | "301" | "301" | "square-open-dot" | "2" | "2" | "diamond" | "102" | "102" | "diamond-open" | "202" | "202" | "diamond-dot" | "302" | "302" | "diamond-open-dot" | "3" | "3" | "cross" | "103" | "103" | "cross-open" | "203" | "203" | "cross-dot" | "303" | "303" | "cross-open-dot" | "4" | "4" | "x" | "104" | "104" | "x-open" | "204" | "204" | "x-dot" | "304" | "304" | "x-open-dot" | "5" | "5" | "triangle-up" | "105" | "105" | "triangle-up-open" | "205" | "205" | "triangle-up-dot" | "305" | "305" | "triangle-up-open-dot" | "6" | "6" | "triangle-down" | "106" | "106" | "triangle-down-open" | "206" | "206" | "triangle-down-dot" | "306" | "306" | "triangle-down-open-dot" | "7" | "7" | "triangle-left" | "107" | "107" | "triangle-left-open" | "207" | "207" | "triangle-left-dot" | "307" | "307" | "triangle-left-open-dot" | "8" | "8" | "triangle-right" | "108" | "108" | "triangle-right-open" | "208" | "208" | "triangle-right-dot" | "308" | "308" | "triangle-right-open-dot" | "9" | "9" | "triangle-ne" | "109" | "109" | "triangle-ne-open" | "209" | "209" | "triangle-ne-dot" | "309" | "309" | "triangle-ne-open-dot" | "10" | "10" | "triangle-se" | "110" | "110" | "triangle-se-open" | "210" | "210" | "triangle-se-dot" | "310" | "310" | "triangle-se-open-dot" | "11" | "11" | "triangle-sw" | "111" | "111" | "triangle-sw-open" | "211" | "211" | "triangle-sw-dot" | "311" | "311" | "triangle-sw-open-dot" | "12" | "12" | "triangle-nw" | "112" | "112" | "triangle-nw-open" | "212" | "212" | "triangle-nw-dot" | "312" | "312" | "triangle-nw-open-dot" | "13" | "13" | "pentagon" | "113" | "113" | "pentagon-open" | "213" | "213" | "pentagon-dot" | "313" | "313" | "pentagon-open-dot" | "14" | "14" | "hexagon" | "114" | "114" | "hexagon-open" | "214" | "214" | "hexagon-dot" | "314" | "314" | "hexagon-open-dot" | "15" | "15" | "hexagon2" | "115" | "115" | "hexagon2-open" | "215" | "215" | "hexagon2-dot" | "315" | "315" | "hexagon2-open-dot" | "16" | "16" | "octagon" | "116" | "116" | "octagon-open" | "216" | "216" | "octagon-dot" | "316" | "316" | "octagon-open-dot" | "17" | "17" | "star" | "117" | "117" | "star-open" | "217" | "217" | "star-dot" | "317" | "317" | "star-open-dot" | "18" | "18" | "hexagram" | "118" | "118" | "hexagram-open" | "218" | "218" | "hexagram-dot" | "318" | "318" | "hexagram-open-dot" | "19" | "19" | "star-triangle-up" | "119" | "119" | "star-triangle-up-open" | "219" | "219" | "star-triangle-up-dot" | "319" | "319" | "star-triangle-up-open-dot" | "20" | "20" | "star-triangle-down" | "120" | "120" | "star-triangle-down-open" | "220" | "220" | "star-triangle-down-dot" | "320" | "320" | "star-triangle-down-open-dot" | "21" | "21" | "star-square" | "121" | "121" | "star-square-open" | "221" | "221" | "star-square-dot" | "321" | "321" | "star-square-open-dot" | "22" | "22" | "star-diamond" | "122" | "122" | "star-diamond-open" | "222" | "222" | "star-diamond-dot" | "322" | "322" | "star-diamond-open-dot" | "23" | "23" | "diamond-tall" | "123" | "123" | "diamond-tall-open" | "223" | "223" | "diamond-tall-dot" | "323" | "323" | "diamond-tall-open-dot" | "24" | "24" | "diamond-wide" | "124" | "124" | "diamond-wide-open" | "224" | "224" | "diamond-wide-dot" | "324" | "324" | "diamond-wide-open-dot" | "25" | "25" | "hourglass" | "125" | "125" | "hourglass-open" | "26" | "26" | "bowtie" | "126" | "126" | "bowtie-open" | "27" | "27" | "circle-cross" | "127" | "127" | "circle-cross-open" | "28" | "28" | "circle-x" | "128" | "128" | "circle-x-open" | "29" | "29" | "square-cross" | "129" | "129" | "square-cross-open" | "30" | "30" | "square-x" | "130" | "130" | "square-x-open" | "31" | "31" | "diamond-cross" | "131" | "131" | "diamond-cross-open" | "32" | "32" | "diamond-x" | "132" | "132" | "diamond-x-open" | "33" | "33" | "cross-thin" | "133" | "133" | "cross-thin-open" | "34" | "34" | "x-thin" | "134" | "134" | "x-thin-open" | "35" | "35" | "asterisk" | "135" | "135" | "asterisk-open" | "36" | "36" | "hash" | "136" | "136" | "hash-open" | "236" | "236" | "hash-dot" | "336" | "336" | "hash-open-dot" | "37" | "37" | "y-up" | "137" | "137" | "y-up-open" | "38" | "38" | "y-down" | "138" | "138" | "y-down-open" | "39" | "39" | "y-left" | "139" | "139" | "y-left-open" | "40" | "40" | "y-right" | "140" | "140" | "y-right-open" | "41" | "41" | "line-ew" | "141" | "141" | "line-ew-open" | "42" | "42" | "line-ns" | "142" | "142" | "line-ns-open" | "43" | "43" | "line-ne" | "143" | "143" | "line-ne-open" | "44" | "44" | "line-nw" | "144" | "144" | "line-nw-open" | "45" | "45" | "arrow-up" | "145" | "145" | "arrow-up-open" | "46" | "46" | "arrow-down" | "146" | "146" | "arrow-down-open" | "47" | "47" | "arrow-left" | "147" | "147" | "arrow-left-open" | "48" | "48" | "arrow-right" | "148" | "148" | "arrow-right-open" | "49" | "49" | "arrow-bar-up" | "149" | "149" | "arrow-bar-up-open" | "50" | "50" | "arrow-bar-down" | "150" | "150" | "arrow-bar-down-open" | "51" | "51" | "arrow-bar-left" | "151" | "151" | "arrow-bar-left-open" | "52" | "52" | "arrow-bar-right" | "152" | "152" | "arrow-bar-right-open" | "53" | "53" | "arrow" | "153" | "153" | "arrow-open" | "54" | "54" | "arrow-wide" | "154" | "154" | "arrow-wide-open" )
  Default: "circle"

  Sets the marker symbol type. Adding 100 is equivalent to appending "-open" to a symbol name. Adding 200 is equivalent to appending "-dot" to a symbol name. Adding 300 is equivalent to appending "-open-dot" or "dot-open" to a symbol name.

• backoff
  Parent: data[type=scatter].line
  Type: number or array of numbers greater than or equal to 0
  Default: "auto"

  Sets the line back off from the end point of the nth line segment (in px). This option is useful e.g. to avoid overlap with arrowhead markers. With "auto" the lines would trim before markers if `marker.angleref` is set to "previous".

• color
  Parent: data[type=scatter].line
  Type: color

  Sets the line color.

• dash
  Parent: data[type=scatter].line
  Type: string
  Default: "solid"

  Sets the dash style of lines. Set to a dash type string ("solid", "dot", "dash", "longdash", "dashdot", or "longdashdot") or a dash length list in px (eg "5px,10px,2px,2px").

• shape
  Parent: data[type=scatter].line
  Type: enumerated , one of ( "linear" | "spline" | "hv" | "vh" | "hvh" | "vhv" )
  Default: "linear"

  Determines the line shape. With "spline" the lines are drawn using spline interpolation. The other available values correspond to step-wise line shapes.

• simplify
  Parent: data[type=scatter].line
  Type: boolean
  Default: TRUE

  Simplifies lines by removing nearly-collinear points. When transitioning lines, it may be desirable to disable this so that the number of points along the resulting SVG path is unaffected.

• smoothing
  Parent: data[type=scatter].line
  Type: number between or equal to 0 and 1.3
  Default: 1

  Has an effect only if `shape` is set to "spline" Sets the amount of smoothing. "0" corresponds to no smoothing (equivalent to a "linear" shape).

• width
  Parent: data[type=scatter].line
  Type: number greater than or equal to 0
  Default: 2

  Sets the line width (in px).

Sets the text font.

• color
  Parent: data[type=scatter].textfont
  Type: color or array of colors
• family
  Parent: data[type=scatter].textfont
  Type: string or array of strings

  HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

• lineposition
  Parent: data[type=scatter].textfont
  Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
  Examples: "under", "over", "under+over", "under+over+through", "none"
  Default: "none"

  Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

• shadow
  Parent: data[type=scatter].textfont
  Type: string or array of strings
  Default: "none"

  Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

• size
  Parent: data[type=scatter].textfont
  Type: number or array of numbers greater than or equal to 1
• style
  Parent: data[type=scatter].textfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "italic" )
  Default: "normal"

  Sets whether a font should be styled with a normal or italic face from its family.

• textcase
  Parent: data[type=scatter].textfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "word caps" | "upper" | "lower" )
  Default: "normal"

  Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

• variant
  Parent: data[type=scatter].textfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
  Default: "normal"

  Sets the variant of the font.

• weight
  Parent: data[type=scatter].textfont
  Type: integer or array of integers between or equal to 1 and 1000
  Default: normal

  Sets the weight (or boldness) of the font.

• array
  Parent: data[type=scatter].error_x
  Type: dataframe column, list, vector

  Sets the data corresponding the length of each error bar. Values are plotted relative to the underlying data.

• arrayminus
  Parent: data[type=scatter].error_x
  Type: dataframe column, list, vector

  Sets the data corresponding the length of each error bar in the bottom (left) direction for vertical (horizontal) bars Values are plotted relative to the underlying data.

• color
  Parent: data[type=scatter].error_x
  Type: color

  Sets the stoke color of the error bars.

• copy_ystyle
  Parent: data[type=scatter].error_x
  Type: boolean
• symmetric
  Parent: data[type=scatter].error_x
  Type: boolean

  Determines whether or not the error bars have the same length in both direction (top/bottom for vertical bars, left/right for horizontal bars.

• thickness
  Parent: data[type=scatter].error_x
  Type: number greater than or equal to 0
  Default: 2

  Sets the thickness (in px) of the error bars.

• traceref
  Parent: data[type=scatter].error_x
  Type: integer greater than or equal to 0
  Default: 0
• tracerefminus
  Parent: data[type=scatter].error_x
  Type: integer greater than or equal to 0
  Default: 0
• type
  Parent: data[type=scatter].error_x
  Type: enumerated , one of ( "percent" | "constant" | "sqrt" | "data" )

  Determines the rule used to generate the error bars. If "constant`, the bar lengths are of a constant value. Set this constant in `value`. If "percent", the bar lengths correspond to a percentage of underlying data. Set this percentage in `value`. If "sqrt", the bar lengths correspond to the square of the underlying data. If "data", the bar lengths are set with data set `array`.

• value
  Parent: data[type=scatter].error_x
  Type: number greater than or equal to 0
  Default: 10

  Sets the value of either the percentage (if `type` is set to "percent") or the constant (if `type` is set to "constant") corresponding to the lengths of the error bars.

• valueminus
  Parent: data[type=scatter].error_x
  Type: number greater than or equal to 0
  Default: 10

  Sets the value of either the percentage (if `type` is set to "percent") or the constant (if `type` is set to "constant") corresponding to the lengths of the error bars in the bottom (left) direction for vertical (horizontal) bars

• visible
  Parent: data[type=scatter].error_x
  Type: boolean

  Determines whether or not this set of error bars is visible.

• width
  Parent: data[type=scatter].error_x
  Type: number greater than or equal to 0

  Sets the width (in px) of the cross-bar at both ends of the error bars.

• array
  Parent: data[type=scatter].error_y
  Type: dataframe column, list, vector

  Sets the data corresponding the length of each error bar. Values are plotted relative to the underlying data.

• arrayminus
  Parent: data[type=scatter].error_y
  Type: dataframe column, list, vector

  Sets the data corresponding the length of each error bar in the bottom (left) direction for vertical (horizontal) bars Values are plotted relative to the underlying data.

• color
  Parent: data[type=scatter].error_y
  Type: color

  Sets the stoke color of the error bars.

• symmetric
  Parent: data[type=scatter].error_y
  Type: boolean

  Determines whether or not the error bars have the same length in both direction (top/bottom for vertical bars, left/right for horizontal bars.

• thickness
  Parent: data[type=scatter].error_y
  Type: number greater than or equal to 0
  Default: 2

  Sets the thickness (in px) of the error bars.

• traceref
  Parent: data[type=scatter].error_y
  Type: integer greater than or equal to 0
  Default: 0
• tracerefminus
  Parent: data[type=scatter].error_y
  Type: integer greater than or equal to 0
  Default: 0
• type
  Parent: data[type=scatter].error_y
  Type: enumerated , one of ( "percent" | "constant" | "sqrt" | "data" )

  Determines the rule used to generate the error bars. If "constant`, the bar lengths are of a constant value. Set this constant in `value`. If "percent", the bar lengths correspond to a percentage of underlying data. Set this percentage in `value`. If "sqrt", the bar lengths correspond to the square of the underlying data. If "data", the bar lengths are set with data set `array`.

• value
  Parent: data[type=scatter].error_y
  Type: number greater than or equal to 0
  Default: 10

  Sets the value of either the percentage (if `type` is set to "percent") or the constant (if `type` is set to "constant") corresponding to the lengths of the error bars.

• valueminus
  Parent: data[type=scatter].error_y
  Type: number greater than or equal to 0
  Default: 10

  Sets the value of either the percentage (if `type` is set to "percent") or the constant (if `type` is set to "constant") corresponding to the lengths of the error bars in the bottom (left) direction for vertical (horizontal) bars

• visible
  Parent: data[type=scatter].error_y
  Type: boolean

  Determines whether or not this set of error bars is visible.

• width
  Parent: data[type=scatter].error_y
  Type: number greater than or equal to 0

  Sets the width (in px) of the cross-bar at both ends of the error bars.

Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

• marker
  Parent: data[type=scatter].selected
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=scatter].selected.marker
    Type: color

    Sets the marker color of selected points.

  • opacity
    Parent: data[type=scatter].selected.marker
    Type: number between or equal to 0 and 1

    Sets the marker opacity of selected points.

  • size
    Parent: data[type=scatter].selected.marker
    Type: number greater than or equal to 0

    Sets the marker size of selected points.

• textfont
  Parent: data[type=scatter].selected
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=scatter].selected.textfont
    Type: color

    Sets the text font color of selected points.

• marker
  Parent: data[type=scatter].unselected
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=scatter].unselected.marker
    Type: color

    Sets the marker color of unselected points, applied only when a selection exists.

  • opacity
    Parent: data[type=scatter].unselected.marker
    Type: number between or equal to 0 and 1

    Sets the marker opacity of unselected points, applied only when a selection exists.

  • size
    Parent: data[type=scatter].unselected.marker
    Type: number greater than or equal to 0

    Sets the marker size of unselected points, applied only when a selection exists.

• textfont
  Parent: data[type=scatter].unselected
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=scatter].unselected.textfont
    Type: color

    Sets the text font color of unselected points, applied only when a selection exists.

Determines whether or not markers and text nodes are clipped about the subplot axes. To show markers and text nodes above axis lines and tick labels, make sure to set `xaxis.layer` and `yaxis.layer` to "below traces".

Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.

Sets the area to fill with a solid color. Defaults to "none" unless this trace is stacked, then it gets "tonexty" ("tonextx") if `orientation` is "v" ("h") Use with `fillcolor` if not "none". "tozerox" and "tozeroy" fill to x=0 and y=0 respectively. "tonextx" and "tonexty" fill between the endpoints of this trace and the endpoints of the trace before it, connecting those endpoints with straight lines (to make a stacked area graph); if there is no trace before it, they behave like "tozerox" and "tozeroy". "toself" connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape. "tonext" fills the space between two traces if one completely encloses the other (eg consecutive contour lines), and behaves like "toself" if there is no trace before it. "tonext" should not be used if one trace does not enclose the other. Traces in a `stackgroup` will only fill to (or be filled to) other traces in the same group. With multiple `stackgroup`s or some traces stacked and some not, if fill-linked traces are not already consecutive, the later ones will be pushed down in the drawing order.

Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available. If fillgradient is specified, fillcolor is ignored except for setting the background color of the hover label, if any.

Sets a fill gradient. If not specified, the fillcolor is used instead.

• colorscale
  Parent: data[type=scatter].fillgradient
  Type: colorscale

  Sets the fill gradient colors as a color scale. The color scale is interpreted as a gradient applied in the direction specified by "orientation", from the lowest to the highest value of the scatter plot along that axis, or from the center to the most distant point from it, if orientation is "radial".

• start
  Parent: data[type=scatter].fillgradient
  Type: number

  Sets the gradient start value. It is given as the absolute position on the axis determined by the orientiation. E.g., if orientation is "horizontal", the gradient will be horizontal and start from the x-position given by start. If omitted, the gradient starts at the lowest value of the trace along the respective axis. Ignored if orientation is "radial".

• stop
  Parent: data[type=scatter].fillgradient
  Type: number

  Sets the gradient end value. It is given as the absolute position on the axis determined by the orientiation. E.g., if orientation is "horizontal", the gradient will be horizontal and end at the x-position given by end. If omitted, the gradient ends at the highest value of the trace along the respective axis. Ignored if orientation is "radial".

• type
  Parent: data[type=scatter].fillgradient
  Type: enumerated , one of ( "radial" | "horizontal" | "vertical" | "none" )
  Default: "none"

  Sets the type/orientation of the color gradient for the fill. Defaults to "none".

Sets the pattern within the marker.

• bgcolor
  Parent: data[type=scatter].fillpattern
  Type: color or array of colors

  When there is no colorscale sets the color of background pattern fill. Defaults to a `marker.color` background when `fillmode` is "overlay". Otherwise, defaults to a transparent background.

• fgcolor
  Parent: data[type=scatter].fillpattern
  Type: color or array of colors

  When there is no colorscale sets the color of foreground pattern fill. Defaults to a `marker.color` background when `fillmode` is "replace". Otherwise, defaults to dark grey or white to increase contrast with the `bgcolor`.

• fgopacity
  Parent: data[type=scatter].fillpattern
  Type: number between or equal to 0 and 1

  Sets the opacity of the foreground pattern fill. Defaults to a 0.5 when `fillmode` is "overlay". Otherwise, defaults to 1.

• fillmode
  Parent: data[type=scatter].fillpattern
  Type: enumerated , one of ( "replace" | "overlay" )
  Default: "replace"

  Determines whether `marker.color` should be used as a default to `bgcolor` or a `fgcolor`.

• shape
  Parent: data[type=scatter].fillpattern
  Type: enumerated or array of enumerateds , one of ( "" | "/" | "\" | "x" | "-" | "|" | "+" | "." )
  Default: ""

  Sets the shape of the pattern fill. By default, no pattern is used for filling the area.

• size
  Parent: data[type=scatter].fillpattern
  Type: number or array of numbers greater than or equal to 0
  Default: 8

  Sets the size of unit squares of the pattern fill in pixels, which corresponds to the interval of repetition of the pattern.

• solidity
  Parent: data[type=scatter].fillpattern
  Type: number or array of numbers between or equal to 0 and 1
  Default: 0.3

  Sets the solidity of the pattern fill. Solidity is roughly the fraction of the area filled by the pattern. Solidity of 0 shows only the background color without pattern and solidty of 1 shows only the foreground color without pattern.

• align
  Parent: data[type=scatter].hoverlabel
  Type: enumerated or array of enumerateds , one of ( "left" | "right" | "auto" )
  Default: "auto"

  Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

• bgcolor
  Parent: data[type=scatter].hoverlabel
  Type: color or array of colors

  Sets the background color of the hover labels for this trace

• bordercolor
  Parent: data[type=scatter].hoverlabel
  Type: color or array of colors

  Sets the border color of the hover labels for this trace.

• font
  Parent: data[type=scatter].hoverlabel
  Type: named list containing one or more of the keys listed below.

  Sets the font used in hover labels.

  • color
    Parent: data[type=scatter].hoverlabel.font
    Type: color or array of colors
  • family
    Parent: data[type=scatter].hoverlabel.font
    Type: string or array of strings

    HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

  • lineposition
    Parent: data[type=scatter].hoverlabel.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=scatter].hoverlabel.font
    Type: string or array of strings
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=scatter].hoverlabel.font
    Type: number or array of numbers greater than or equal to 1
  • style
    Parent: data[type=scatter].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=scatter].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=scatter].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=scatter].hoverlabel.font
    Type: integer or array of integers between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• namelength
  Parent: data[type=scatter].hoverlabel
  Type: integer or array of integers greater than or equal to -1
  Default: 15

  Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to `namelength - 3` characters and add an ellipsis.

Do the hover effects highlight individual points (markers or line points) or do they highlight filled regions? If the fill is "toself" or "tonext" and there are no markers or text, then the default is "fills", otherwise it is "points".

Only relevant when `stackgroup` is used, and only the first `stackgaps` found in the `stackgroup` will be used - including if `visible` is "legendonly" but not if it is `FALSE`. Determines how we handle locations at which other traces in this group have data but this one does not. With "infer zero" we insert a zero at these locations. With "interpolate" we linearly interpolate between existing values, and extrapolate a constant beyond the existing values.

Sets the calendar system to use with `x` date data.

Sets the calendar system to use with `y` date data.

Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: TRUE` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: TRUE}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.