Sets the trace name. The trace name appears as the legend item and on hover.

Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

Determines whether or not an item corresponding to this trace is shown in the legend.

Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc.

Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.

• font
  Parent: data[type=waterfall].legendgrouptitle
  Type: named list containing one or more of the keys listed below.

  Sets this legend group's title font.

  • color
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: color
  • family
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: string

    HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

  • lineposition
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: string
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: number greater than or equal to 1
  • style
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: enumerated , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=waterfall].legendgrouptitle.font
    Type: integer between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• text
  Parent: data[type=waterfall].legendgrouptitle
  Type: string
  Default: ""

  Sets the title of the legend group.

Sets the width (in px or fraction) of the legend for this trace.

Sets the opacity of the trace.

Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

Sets the layer on which this trace is displayed, relative to other SVG traces on the same subplot. SVG traces with higher `zorder` appear in front of those with lower `zorder`.

Sets the x coordinates.

Alternate to `x`. Builds a linear space of x coordinates. Use with `dx` where `x0` is the starting coordinate and `dx` the step.

Sets the x coordinate step. See `x0` for more info.

Sets the y coordinates.

Alternate to `y`. Builds a linear space of y coordinates. Use with `dy` where `y0` is the starting coordinate and `dy` the step.

Sets the y coordinate step. See `y0` for more info.

Sets where the bar base is drawn (in position axis units).

Sets the bar width (in position axis units).

An array containing types of values. By default the values are considered as 'relative'. However; it is possible to use 'total' to compute the sums. Also 'absolute' could be applied to reset the computed total or to declare an initial value where needed.

Shifts the position where the bar is drawn (in position axis units). In "group" barmode, traces that set "offset" will be excluded and drawn in "overlay" mode instead.

Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels.

Specifies the location of the `text`. "inside" positions `text` inside, next to the bar end (rotated and scaled if needed). "outside" positions `text` outside, next to the bar end (scaled if needed), unless there is another bar stacked on this one, then the text gets pushed inside. "auto" tries to position `text` inside the bar, but if the bar is too small and no bar is stacked on this one the text is moved outside. If "none", no text appears.

Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: TRUE`) are available. Finally, the template string has access to variables `initial`, `delta`, `final` and `label`.

Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag.

Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired.

Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: TRUE`) are available. Finally, the template string has access to variables `initial`, `delta` and `final`. Anything contained in tag `<extra>` is displayed in the secondary box, for example "<extra>{fullData.name}</extra>". To hide the secondary box completely, use an empty tag `<extra></extra>`.

Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"By default the values are formatted using `xaxis.hoverformat`.

Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time-format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, "2016-10-13 09:15:23.456" with tickformat "%H~%M~%S.%2f" would display "09~15~23.46"By default the values are formatted using `yaxis.hoverformat`.

Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index.

Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements

Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If "x" (the default value), the x coordinates refer to `layout.xaxis`. If "x2", the x coordinates refer to `layout.xaxis2`, and so on.

Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If "y" (the default value), the y coordinates refer to `layout.yaxis`. If "y2", the y coordinates refer to `layout.yaxis2`, and so on.

Sets the orientation of the bars. With "v" ("h"), the value of the each bar spans along the vertical (horizontal).

Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently.

Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up.

Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M<n>" on the x axis. Special values in the form of "M<n>" could be used to declare the number of months. In this case `n` must be a positive integer.

Only relevant when the axis `type` is "date". Sets the alignment of data points on the x axis.

Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the x0 axis. When `x0period` is round number of weeks, the `x0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M<n>" on the y axis. Special values in the form of "M<n>" could be used to declare the number of months. In this case `n` must be a positive integer.

Only relevant when the axis `type` is "date". Sets the alignment of data points on the y axis.

Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the y0 axis. When `y0period` is round number of weeks, the `y0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

Sets the angle of the tick labels with respect to the bar. For example, a `tickangle` of -90 draws the tick labels vertically. With "auto" the texts may automatically be rotated to fit with the maximum size in bars.

Sets the font used for `text`.

• color
  Parent: data[type=waterfall].textfont
  Type: color or array of colors
• family
  Parent: data[type=waterfall].textfont
  Type: string or array of strings

  HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

• lineposition
  Parent: data[type=waterfall].textfont
  Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
  Examples: "under", "over", "under+over", "under+over+through", "none"
  Default: "none"

  Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

• shadow
  Parent: data[type=waterfall].textfont
  Type: string or array of strings
  Default: "none"

  Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

• size
  Parent: data[type=waterfall].textfont
  Type: number or array of numbers greater than or equal to 1
• style
  Parent: data[type=waterfall].textfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "italic" )
  Default: "normal"

  Sets whether a font should be styled with a normal or italic face from its family.

• textcase
  Parent: data[type=waterfall].textfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "word caps" | "upper" | "lower" )
  Default: "normal"

  Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

• variant
  Parent: data[type=waterfall].textfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
  Default: "normal"

  Sets the variant of the font.

• weight
  Parent: data[type=waterfall].textfont
  Type: integer or array of integers between or equal to 1 and 1000
  Default: normal

  Sets the weight (or boldness) of the font.

Determines which trace information appear on the graph. In the case of having multiple waterfalls, totals are computed separately (per trace).

Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect.

Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set `xaxis.layer` and `yaxis.layer` to "below traces".

• line
  Parent: data[type=waterfall].connector
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=waterfall].connector.line
    Type: color
    Default: "#444"

    Sets the line color.

  • dash
    Parent: data[type=waterfall].connector.line
    Type: string
    Default: "solid"

    Sets the dash style of lines. Set to a dash type string ("solid", "dot", "dash", "longdash", "dashdot", or "longdashdot") or a dash length list in px (eg "5px,10px,2px,2px").

  • width
    Parent: data[type=waterfall].connector.line
    Type: number greater than or equal to 0
    Default: 2

    Sets the line width (in px).

• mode
  Parent: data[type=waterfall].connector
  Type: enumerated , one of ( "spanning" | "between" )
  Default: "between"

  Sets the shape of connector lines.

• visible
  Parent: data[type=waterfall].connector
  Type: boolean
  Default: TRUE

  Determines if connector lines are drawn.

Constrain the size of text inside or outside a bar to be no larger than the bar itself.

• marker
  Parent: data[type=waterfall].increasing
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=waterfall].increasing.marker
    Type: color

    Sets the marker color of all increasing values.

  • line
    Parent: data[type=waterfall].increasing.marker
    Type: named list containing one or more of the keys listed below.
    • color
      Parent: data[type=waterfall].increasing.marker.line
      Type: color

      Sets the line color of all increasing values.

    • width
      Parent: data[type=waterfall].increasing.marker.line
      Type: number greater than or equal to 0
      Default: 0

      Sets the line width of all increasing values.

• marker
  Parent: data[type=waterfall].decreasing
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=waterfall].decreasing.marker
    Type: color

    Sets the marker color of all decreasing values.

  • line
    Parent: data[type=waterfall].decreasing.marker
    Type: named list containing one or more of the keys listed below.
    • color
      Parent: data[type=waterfall].decreasing.marker.line
      Type: color

      Sets the line color of all decreasing values.

    • width
      Parent: data[type=waterfall].decreasing.marker.line
      Type: number greater than or equal to 0
      Default: 0

      Sets the line width of all decreasing values.

• align
  Parent: data[type=waterfall].hoverlabel
  Type: enumerated or array of enumerateds , one of ( "left" | "right" | "auto" )
  Default: "auto"

  Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

• bgcolor
  Parent: data[type=waterfall].hoverlabel
  Type: color or array of colors

  Sets the background color of the hover labels for this trace

• bordercolor
  Parent: data[type=waterfall].hoverlabel
  Type: color or array of colors

  Sets the border color of the hover labels for this trace.

• font
  Parent: data[type=waterfall].hoverlabel
  Type: named list containing one or more of the keys listed below.

  Sets the font used in hover labels.

  • color
    Parent: data[type=waterfall].hoverlabel.font
    Type: color or array of colors
  • family
    Parent: data[type=waterfall].hoverlabel.font
    Type: string or array of strings

    HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

  • lineposition
    Parent: data[type=waterfall].hoverlabel.font
    Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
    Examples: "under", "over", "under+over", "under+over+through", "none"
    Default: "none"

    Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

  • shadow
    Parent: data[type=waterfall].hoverlabel.font
    Type: string or array of strings
    Default: "none"

    Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

  • size
    Parent: data[type=waterfall].hoverlabel.font
    Type: number or array of numbers greater than or equal to 1
  • style
    Parent: data[type=waterfall].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "italic" )
    Default: "normal"

    Sets whether a font should be styled with a normal or italic face from its family.

  • textcase
    Parent: data[type=waterfall].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "word caps" | "upper" | "lower" )
    Default: "normal"

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

  • variant
    Parent: data[type=waterfall].hoverlabel.font
    Type: enumerated or array of enumerateds , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
    Default: "normal"

    Sets the variant of the font.

  • weight
    Parent: data[type=waterfall].hoverlabel.font
    Type: integer or array of integers between or equal to 1 and 1000
    Default: normal

    Sets the weight (or boldness) of the font.

• namelength
  Parent: data[type=waterfall].hoverlabel
  Type: integer or array of integers greater than or equal to -1
  Default: 15

  Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to `namelength - 3` characters and add an ellipsis.

Determines if texts are kept at center or start/end points in `textposition` "inside" mode.

Sets the font used for `text` lying inside the bar.

• color
  Parent: data[type=waterfall].insidetextfont
  Type: color or array of colors
• family
  Parent: data[type=waterfall].insidetextfont
  Type: string or array of strings

  HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

• lineposition
  Parent: data[type=waterfall].insidetextfont
  Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
  Examples: "under", "over", "under+over", "under+over+through", "none"
  Default: "none"

  Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

• shadow
  Parent: data[type=waterfall].insidetextfont
  Type: string or array of strings
  Default: "none"

  Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

• size
  Parent: data[type=waterfall].insidetextfont
  Type: number or array of numbers greater than or equal to 1
• style
  Parent: data[type=waterfall].insidetextfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "italic" )
  Default: "normal"

  Sets whether a font should be styled with a normal or italic face from its family.

• textcase
  Parent: data[type=waterfall].insidetextfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "word caps" | "upper" | "lower" )
  Default: "normal"

  Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

• variant
  Parent: data[type=waterfall].insidetextfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
  Default: "normal"

  Sets the variant of the font.

• weight
  Parent: data[type=waterfall].insidetextfont
  Type: integer or array of integers between or equal to 1 and 1000
  Default: normal

  Sets the weight (or boldness) of the font.

Sets the font used for `text` lying outside the bar.

• color
  Parent: data[type=waterfall].outsidetextfont
  Type: color or array of colors
• family
  Parent: data[type=waterfall].outsidetextfont
  Type: string or array of strings

  HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans", "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman".

• lineposition
  Parent: data[type=waterfall].outsidetextfont
  Type: flaglist string. Any combination of "under", "over", "through" joined with a "+" OR "none".
  Examples: "under", "over", "under+over", "under+over+through", "none"
  Default: "none"

  Sets the kind of decoration line(s) with text, such as an "under", "over" or "through" as well as combinations e.g. "under+over", etc.

• shadow
  Parent: data[type=waterfall].outsidetextfont
  Type: string or array of strings
  Default: "none"

  Sets the shape and color of the shadow behind text. "auto" places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

• size
  Parent: data[type=waterfall].outsidetextfont
  Type: number or array of numbers greater than or equal to 1
• style
  Parent: data[type=waterfall].outsidetextfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "italic" )
  Default: "normal"

  Sets whether a font should be styled with a normal or italic face from its family.

• textcase
  Parent: data[type=waterfall].outsidetextfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "word caps" | "upper" | "lower" )
  Default: "normal"

  Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

• variant
  Parent: data[type=waterfall].outsidetextfont
  Type: enumerated or array of enumerateds , one of ( "normal" | "small-caps" | "all-small-caps" | "all-petite-caps" | "petite-caps" | "unicase" )
  Default: "normal"

  Sets the variant of the font.

• weight
  Parent: data[type=waterfall].outsidetextfont
  Type: integer or array of integers between or equal to 1 and 1000
  Default: normal

  Sets the weight (or boldness) of the font.

• marker
  Parent: data[type=waterfall].totals
  Type: named list containing one or more of the keys listed below.
  • color
    Parent: data[type=waterfall].totals.marker
    Type: color

    Sets the marker color of all intermediate sums and total values.

  • line
    Parent: data[type=waterfall].totals.marker
    Type: named list containing one or more of the keys listed below.
    • color
      Parent: data[type=waterfall].totals.marker.line
      Type: color

      Sets the line color of all intermediate sums and total values.

    • width
      Parent: data[type=waterfall].totals.marker.line
      Type: number greater than or equal to 0
      Default: 0

      Sets the line width of all intermediate sums and total values.

Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: TRUE` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: TRUE}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves.