plotly.graph_objects.Ohlc

class plotly.graph_objects.Ohlc(arg=None, close=None, closesrc=None, customdata=None, customdatasrc=None, decreasing=None, high=None, highsrc=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, increasing=None, legend=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, line=None, low=None, lowsrc=None, meta=None, metasrc=None, name=None, opacity=None, open=None, opensrc=None, selectedpoints=None, showlegend=None, stream=None, text=None, textsrc=None, tickwidth=None, uid=None, uirevision=None, visible=None, x=None, xaxis=None, xcalendar=None, xhoverformat=None, xperiod=None, xperiod0=None, xperiodalignment=None, xsrc=None, yaxis=None, yhoverformat=None, zorder=None, **kwargs)

__init__(arg=None, close=None, closesrc=None, customdata=None, customdatasrc=None, decreasing=None, high=None, highsrc=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, increasing=None, legend=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, line=None, low=None, lowsrc=None, meta=None, metasrc=None, name=None, opacity=None, open=None, opensrc=None, selectedpoints=None, showlegend=None, stream=None, text=None, textsrc=None, tickwidth=None, uid=None, uirevision=None, visible=None, x=None, xaxis=None, xcalendar=None, xhoverformat=None, xperiod=None, xperiod0=None, xperiodalignment=None, xsrc=None, yaxis=None, yhoverformat=None, zorder=None, **kwargs)

Construct a new Ohlc object

The ohlc (short for Open-High-Low-Close) is a style of financial chart describing open, high, low and close for a given x coordinate (most likely time). The tip of the lines represent the low and high values and the horizontal segments represent the open and close values. Sample points where the close value is higher (lower) then the open value are called increasing (decreasing). By default, increasing items are drawn in green whereas decreasing are drawn in red.

Parameters

• arg – dict of properties compatible with this constructor or an instance of plotly.graph_objects.Ohlc

• close – Sets the close values.

• closesrc – Sets the source reference on Chart Studio Cloud for close.

• customdata – Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, “scatter” traces also appends customdata items in the markers DOM elements

• customdatasrc – Sets the source reference on Chart Studio Cloud for customdata.

• decreasing – plotly.graph_objects.ohlc.Decreasing instance or dict with compatible properties

• high – Sets the high values.

• highsrc – Sets the source reference on Chart Studio Cloud for high.

• hoverinfo – Determines which trace information appear on hover. If none or skip are set, no information is displayed upon hovering. But, if none is set, click and hover events are still fired.

• hoverinfosrc – Sets the source reference on Chart Studio Cloud for hoverinfo.

• hoverlabel – plotly.graph_objects.ohlc.Hoverlabel instance or dict with compatible properties

• hovertext – Same as text.

• hovertextsrc – Sets the source reference on Chart Studio Cloud for hovertext.

• ids – Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

• idssrc – Sets the source reference on Chart Studio Cloud for ids.

• increasing – plotly.graph_objects.ohlc.Increasing instance or dict with compatible properties

• legend – Sets the reference to a legend to show this trace in. References to these legends are “legend”, “legend2”, “legend3”, etc. Settings for these legends are set in the layout, under layout.legend, layout.legend2, etc.

• legendgroup – Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.

• legendgrouptitle – plotly.graph_objects.ohlc.Legendgrouptitle instance or dict with compatible properties

• legendrank – Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with “reversed” legend.traceorder they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.

• legendwidth – Sets the width (in px or fraction) of the legend for this trace.

• line – plotly.graph_objects.ohlc.Line instance or dict with compatible properties

• low – Sets the low values.

• lowsrc – Sets the source reference on Chart Studio Cloud for low.

• meta – Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace name, graph, axis and colorbar title.text, annotation text rangeselector, updatemenues and sliders label text all support meta. To access the trace meta values in an attribute in the same trace, simply use %{meta[i]} where i is the index or key of the meta item in question. To access trace meta in layout attributes, use %{data[n[.meta[i]} where i is the index or key of the meta and n is the trace index.

• metasrc – Sets the source reference on Chart Studio Cloud for meta.

• name – Sets the trace name. The trace name appears as the legend item and on hover.

• opacity – Sets the opacity of the trace.

• open – Sets the open values.

• opensrc – Sets the source reference on Chart Studio Cloud for open.

• selectedpoints – Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the unselected are turned on for all points, whereas, any other non-array values means no selection all where the selected and unselected styles have no effect.

• showlegend – Determines whether or not an item corresponding to this trace is shown in the legend.

• stream – plotly.graph_objects.ohlc.Stream instance or dict with compatible properties

• text – Sets hover text elements associated with each sample point. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to this trace’s sample points.

• textsrc – Sets the source reference on Chart Studio Cloud for text.

• tickwidth – Sets the width of the open/close tick marks relative to the “x” minimal interval.

• uid – Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

• uirevision – Controls persistence of some user-driven changes to the trace: constraintrange in parcoords traces, as well as some editable: true modifications such as name and colorbar.title. Defaults to layout.uirevision. Note that other user-driven trace attribute changes are controlled by layout attributes: trace.visible is controlled by layout.legend.uirevision, selectedpoints is controlled by layout.selectionrevision, and colorbar.(x|y) (accessible with config: {editable: true}) is controlled by layout.editrevision. Trace changes are tracked by uid, which only falls back on trace index if no uid is provided. So if your app can add/remove traces before the end of the data array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a uid that stays with it as it moves.

• visible – Determines whether or not this trace is visible. If “legendonly”, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

• x – Sets the x coordinates. If absent, linear coordinate will be generated.

• xaxis – Sets a reference between this trace’s x coordinates and a 2D cartesian x axis. If “x” (the default value), the x coordinates refer to layout.xaxis. If “x2”, the x coordinates refer to layout.xaxis2, and so on.

• xcalendar – Sets the calendar system to use with x date data.

• xhoverformat – Sets the hover text formatting rulefor x using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display *09~15~23.46*By default the values are formatted using xaxis.hoverformat.

• xperiod – Only relevant when the axis type is “date”. Sets the period positioning in milliseconds or “M<n>” on the x axis. Special values in the form of “M<n>” could be used to declare the number of months. In this case n must be a positive integer.

• xperiod0 – Only relevant when the axis type is “date”. Sets the base for period positioning in milliseconds or date string on the x0 axis. When x0period is round number of weeks, the x0period0 by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.

• xperiodalignment – Only relevant when the axis type is “date”. Sets the alignment of data points on the x axis.

• xsrc – Sets the source reference on Chart Studio Cloud for x.

• yaxis – Sets a reference between this trace’s y coordinates and a 2D cartesian y axis. If “y” (the default value), the y coordinates refer to layout.yaxis. If “y2”, the y coordinates refer to layout.yaxis2, and so on.

• yhoverformat – Sets the hover text formatting rulefor y using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display *09~15~23.46*By default the values are formatted using yaxis.hoverformat.

• zorder – Sets the layer on which this trace is displayed, relative to other SVG traces on the same subplot. SVG traces with higher zorder appear in front of those with lower zorder.

Returns

Return type

Ohlc

plotly.graph_objects.ohlc

plotly.graph_objects.ohlc

class plotly.graph_objects.ohlc.Decreasing(arg=None, line=None, **kwargs)

property line

The ‘line’ property is an instance of Line that may be specified as:

• An instance of plotly.graph_objects.ohlc.decreasing.Line

• A dict of string/value properties that will be passed to the Line constructor

  Supported dict properties:

  color

  Sets the line color.

  dash

  Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”).

  width

  Sets the line width (in px).

Returns

Return type

plotly.graph_objects.ohlc.decreasing.Line

class plotly.graph_objects.ohlc.Hoverlabel(arg=None, align=None, alignsrc=None, bgcolor=None, bgcolorsrc=None, bordercolor=None, bordercolorsrc=None, font=None, namelength=None, namelengthsrc=None, split=None, **kwargs)

property align

Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

The ‘align’ property is an enumeration that may be specified as:

• One of the following enumeration values:

  [‘left’, ‘right’, ‘auto’]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

Any|numpy.ndarray

property alignsrc

Sets the source reference on Chart Studio Cloud for align.

The ‘alignsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns

Return type

str

property bgcolor

Sets the background color of the hover labels for this trace

The ‘bgcolor’ property is a color and may be specified as:

• A hex string (e.g. ‘#ff0000’)

• An rgb/rgba string (e.g. ‘rgb(255,0,0)’)

• An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)

• An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)

• A named CSS color:

  aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property bgcolorsrc

Sets the source reference on Chart Studio Cloud for bgcolor.

The ‘bgcolorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns

Return type

str

property bordercolor

Sets the border color of the hover labels for this trace.

The ‘bordercolor’ property is a color and may be specified as:

• A hex string (e.g. ‘#ff0000’)

• An rgb/rgba string (e.g. ‘rgb(255,0,0)’)

• An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)

• An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)

• A named CSS color:

  aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen

• A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property bordercolorsrc

Sets the source reference on Chart Studio Cloud for bordercolor.

The ‘bordercolorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns

Return type

str

property font

Sets the font used in hover labels.

The ‘font’ property is an instance of Font that may be specified as:

• An instance of plotly.graph_objects.ohlc.hoverlabel.Font

• A dict of string/value properties that will be passed to the Font constructor

  Supported dict properties:

  color

  colorsrc

  Sets the source reference on Chart Studio Cloud for color.

  family

  HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

  familysrc

  Sets the source reference on Chart Studio Cloud for family.

  lineposition

  Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

  linepositionsrc

  Sets the source reference on Chart Studio Cloud for lineposition.

  shadow

  Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en- US/docs/Web/CSS/text-shadow for additional options.

  shadowsrc

  Sets the source reference on Chart Studio Cloud for shadow.

  size

  sizesrc

  Sets the source reference on Chart Studio Cloud for size.

  style

  Sets whether a font should be styled with a normal or italic face from its family.

  stylesrc

  Sets the source reference on Chart Studio Cloud for style.

  textcase

  Sets capitalization of text. It can be used to make text appear in all-uppercase or all- lowercase, or with each word capitalized.

  textcasesrc

  Sets the source reference on Chart Studio Cloud for textcase.

  variant

  Sets the variant of the font.

  variantsrc

  Sets the source reference on Chart Studio Cloud for variant.

  weight

  Sets the weight (or boldness) of the font.

  weightsrc

  Sets the source reference on Chart Studio Cloud for weight.

Returns

Return type

plotly.graph_objects.ohlc.hoverlabel.Font

property namelength

Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to namelength - 3 characters and add an ellipsis.

The ‘namelength’ property is a integer and may be specified as:

• An int (or float that will be cast to an int) in the interval [-1, 9223372036854775807]

• A tuple, list, or one-dimensional numpy array of the above

Returns

Return type

int|numpy.ndarray

property namelengthsrc

Sets the source reference on Chart Studio Cloud for namelength.

The ‘namelengthsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns

Return type

str

property split

Show hover information (open, close, high, low) in separate labels.

The ‘split’ property must be specified as a bool (either True, or False)

Returns

Return type

bool

class plotly.graph_objects.ohlc.Increasing(arg=None, line=None, **kwargs)

property line

The ‘line’ property is an instance of Line that may be specified as:

• An instance of plotly.graph_objects.ohlc.increasing.Line

• A dict of string/value properties that will be passed to the Line constructor

  Supported dict properties:

  color

  Sets the line color.

  dash

  Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”).

  width

  Sets the line width (in px).

Returns

Return type

plotly.graph_objects.ohlc.increasing.Line

class plotly.graph_objects.ohlc.Legendgrouptitle(arg=None, font=None, text=None, **kwargs)

property font

Sets this legend group’s title font.

The ‘font’ property is an instance of Font that may be specified as:

• An instance of plotly.graph_objects.ohlc.legendgrouptitle.Font

• A dict of string/value properties that will be passed to the Font constructor

  Supported dict properties:

  color

  family

  HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

  lineposition

  Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

  shadow

  Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en- US/docs/Web/CSS/text-shadow for additional options.

  size

  style

  Sets whether a font should be styled with a normal or italic face from its family.

  textcase

  Sets capitalization of text. It can be used to make text appear in all-uppercase or all- lowercase, or with each word capitalized.

  variant

  Sets the variant of the font.

  weight

  Sets the weight (or boldness) of the font.

Returns

Return type

plotly.graph_objects.ohlc.legendgrouptitle.Font

property text

Sets the title of the legend group.

The ‘text’ property is a string and must be specified as:

• A string

• A number that will be converted to a string

Returns

Return type

str

class plotly.graph_objects.ohlc.Line(arg=None, dash=None, width=None, **kwargs)

property dash

Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”). Note that this style setting can also be set per direction via increasing.line.dash and decreasing.line.dash.

The ‘dash’ property is an enumeration that may be specified as:

• One of the following dash styles:

  [‘solid’, ‘dot’, ‘dash’, ‘longdash’, ‘dashdot’, ‘longdashdot’]

• A string containing a dash length list in pixels or percentages

  (e.g. ‘5px 10px 2px 2px’, ‘5, 10, 2, 2’, ‘10% 20% 40%’, etc.)

Returns

Return type

str

property width

[object Object] Note that this style setting can also be set per direction via increasing.line.width and decreasing.line.width.

The ‘width’ property is a number and may be specified as:

• An int or float in the interval [0, inf]

Returns

Return type

int|float

class plotly.graph_objects.ohlc.Stream(arg=None, maxpoints=None, token=None, **kwargs)

property maxpoints

Sets the maximum number of points to keep on the plots from an incoming stream. If maxpoints is set to 50, only the newest 50 points will be displayed on the plot.

The ‘maxpoints’ property is a number and may be specified as:

• An int or float in the interval [0, 10000]

Returns

Return type

int|float

property token

The stream id number links a data trace on a plot with a stream. See https://chart-studio.plotly.com/settings for more details.

The ‘token’ property is a string and must be specified as:

• A non-empty string

Returns

Return type

str