`plotly.graph_objects`.Waterfall¶

class plotly.graph_objects.Waterfall(arg=None, alignmentgroup=None, base=None, cliponaxis=None, connector=None, constraintext=None, customdata=None, customdatasrc=None, decreasing=None, dx=None, dy=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, increasing=None, insidetextanchor=None, insidetextfont=None, legend=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, measure=None, measuresrc=None, meta=None, metasrc=None, name=None, offset=None, offsetgroup=None, offsetsrc=None, opacity=None, orientation=None, outsidetextfont=None, selectedpoints=None, showlegend=None, stream=None, text=None, textangle=None, textfont=None, textinfo=None, textposition=None, textpositionsrc=None, textsrc=None, texttemplate=None, texttemplatesrc=None, totals=None, uid=None, uirevision=None, visible=None, width=None, widthsrc=None, x=None, x0=None, xaxis=None, xhoverformat=None, xperiod=None, xperiod0=None, xperiodalignment=None, xsrc=None, y=None, y0=None, yaxis=None, yhoverformat=None, yperiod=None, yperiod0=None, yperiodalignment=None, ysrc=None, zorder=None, **kwargs)¶

__init__(arg=None, alignmentgroup=None, base=None, cliponaxis=None, connector=None, constraintext=None, customdata=None, customdatasrc=None, decreasing=None, dx=None, dy=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, increasing=None, insidetextanchor=None, insidetextfont=None, legend=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, measure=None, measuresrc=None, meta=None, metasrc=None, name=None, offset=None, offsetgroup=None, offsetsrc=None, opacity=None, orientation=None, outsidetextfont=None, selectedpoints=None, showlegend=None, stream=None, text=None, textangle=None, textfont=None, textinfo=None, textposition=None, textpositionsrc=None, textsrc=None, texttemplate=None, texttemplatesrc=None, totals=None, uid=None, uirevision=None, visible=None, width=None, widthsrc=None, x=None, x0=None, xaxis=None, xhoverformat=None, xperiod=None, xperiod0=None, xperiodalignment=None, xsrc=None, y=None, y0=None, yaxis=None, yhoverformat=None, yperiod=None, yperiod0=None, yperiodalignment=None, ysrc=None, zorder=None, **kwargs)¶

Construct a new Waterfall object

Draws waterfall trace which is useful graph to displays the contribution of various elements (either positive or negative) in a bar chart. The data visualized by the span of the bars is set in y if orientation is set to “v” (the default) and the labels are set in x. By setting orientation to “h”, the roles are interchanged.

Parameters

arg – dict of properties compatible with this constructor or an instance of plotly.graph_objects.Waterfall
alignmentgroup – Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently.
base – Sets where the bar base is drawn (in position axis units).
cliponaxis – Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set xaxis.layer and yaxis.layer to below traces.
connector – plotly.graph_objects.waterfall.Connector instance or dict with compatible properties
constraintext – Constrain the size of text inside or outside a bar to be no larger than the bar itself.
customdata – Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, “scatter” traces also appends customdata items in the markers DOM elements
customdatasrc – Sets the source reference on Chart Studio Cloud for customdata.
decreasing – plotly.graph_objects.waterfall.Decreasing instance or dict with compatible properties
dx – Sets the x coordinate step. See x0 for more info.
dy – Sets the y coordinate step. See y0 for more info.
hoverinfo – Determines which trace information appear on hover. If none or skip are set, no information is displayed upon hovering. But, if none is set, click and hover events are still fired.
hoverinfosrc – Sets the source reference on Chart Studio Cloud for hoverinfo.
hoverlabel – plotly.graph_objects.waterfall.Hoverlabel instance or dict with compatible properties
hovertemplate – Template string used for rendering the information that appear on hover box. Note that this will override hoverinfo. Variables are inserted using %{variable}, for example “y: %{y}” as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, “xother” will be added to those with different x positions from the first point. An underscore before or after “(x|y)other” will add a space on that side, only when this field is shown. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in hovertemplate are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, every attributes that can be specified per-point (the ones that are arrayOk: true) are available. Finally, the template string has access to variables initial, delta and final. Anything contained in tag <extra> is displayed in the secondary box, for example “<extra>{fullData.name}</extra>”. To hide the secondary box completely, use an empty tag <extra></extra>.
hovertemplatesrc – Sets the source reference on Chart Studio Cloud for hovertemplate.
hovertext – Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace’s (x,y) coordinates. To be seen, trace hoverinfo must contain a “text” flag.
hovertextsrc – Sets the source reference on Chart Studio Cloud for hovertext.
ids – Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.
idssrc – Sets the source reference on Chart Studio Cloud for ids.
increasing – plotly.graph_objects.waterfall.Increasing instance or dict with compatible properties
insidetextanchor – Determines if texts are kept at center or start/end points in textposition “inside” mode.
insidetextfont – Sets the font used for text lying inside the bar.
legend – Sets the reference to a legend to show this trace in. References to these legends are “legend”, “legend2”, “legend3”, etc. Settings for these legends are set in the layout, under layout.legend, layout.legend2, etc.
legendgroup – Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items.
legendgrouptitle – :class:`plotly.graph_objects.waterfall.Legendgrouptitle ` instance or dict with compatible properties
legendrank – Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with “reversed” legend.traceorder they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout.
legendwidth – Sets the width (in px or fraction) of the legend for this trace.
measure – An array containing types of values. By default the values are considered as ‘relative’. However; it is possible to use ‘total’ to compute the sums. Also ‘absolute’ could be applied to reset the computed total or to declare an initial value where needed.
measuresrc – Sets the source reference on Chart Studio Cloud for measure.
meta – Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace name, graph, axis and colorbar title.text, annotation text rangeselector, updatemenues and sliders label text all support meta. To access the trace meta values in an attribute in the same trace, simply use %{meta[i]} where i is the index or key of the meta item in question. To access trace meta in layout attributes, use %{data[n[.meta[i]} where i is the index or key of the meta and n is the trace index.
metasrc – Sets the source reference on Chart Studio Cloud for meta.
name – Sets the trace name. The trace name appears as the legend item and on hover.
offset – Shifts the position where the bar is drawn (in position axis units). In “group” barmode, traces that set “offset” will be excluded and drawn in “overlay” mode instead.
offsetgroup – Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up.
offsetsrc – Sets the source reference on Chart Studio Cloud for offset.
opacity – Sets the opacity of the trace.
orientation – Sets the orientation of the bars. With “v” (“h”), the value of the each bar spans along the vertical (horizontal).
outsidetextfont – Sets the font used for text lying outside the bar.
selectedpoints – Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the unselected are turned on for all points, whereas, any other non-array values means no selection all where the selected and unselected styles have no effect.
showlegend – Determines whether or not an item corresponding to this trace is shown in the legend.
stream – plotly.graph_objects.waterfall.Stream instance or dict with compatible properties
text – Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace’s (x,y) coordinates. If trace hoverinfo contains a “text” flag and “hovertext” is not set, these elements will be seen in the hover labels.
textangle – Sets the angle of the tick labels with respect to the bar. For example, a tickangle of -90 draws the tick labels vertically. With “auto” the texts may automatically be rotated to fit with the maximum size in bars.
textfont – Sets the font used for text.
textinfo – Determines which trace information appear on the graph. In the case of having multiple waterfalls, totals are computed separately (per trace).
textposition – Specifies the location of the text. “inside” positions text inside, next to the bar end (rotated and scaled if needed). “outside” positions text outside, next to the bar end (scaled if needed), unless there is another bar stacked on this one, then the text gets pushed inside. “auto” tries to position text inside the bar, but if the bar is too small and no bar is stacked on this one the text is moved outside. If “none”, no text appears.
textpositionsrc – Sets the source reference on Chart Studio Cloud for textposition.
textsrc – Sets the source reference on Chart Studio Cloud for text.
texttemplate – Template string used for rendering the information text that appear on points. Note that this will override textinfo. Variables are inserted using %{variable}, for example “y: %{y}”. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are arrayOk: true) are available. Finally, the template string has access to variables initial, delta, final and label.
texttemplatesrc – Sets the source reference on Chart Studio Cloud for texttemplate.
totals – plotly.graph_objects.waterfall.Totals instance or dict with compatible properties
uid – Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.
uirevision – Controls persistence of some user-driven changes to the trace: constraintrange in parcoords traces, as well as some editable: true modifications such as name and colorbar.title. Defaults to layout.uirevision. Note that other user-driven trace attribute changes are controlled by layout attributes: trace.visible is controlled by layout.legend.uirevision, selectedpoints is controlled by layout.selectionrevision, and colorbar.(x|y) (accessible with config: {editable: true}) is controlled by layout.editrevision. Trace changes are tracked by uid, which only falls back on trace index if no uid is provided. So if your app can add/remove traces before the end of the data array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a uid that stays with it as it moves.
visible – Determines whether or not this trace is visible. If “legendonly”, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).
width – Sets the bar width (in position axis units).
widthsrc – Sets the source reference on Chart Studio Cloud for width.
x – Sets the x coordinates.
x0 – Alternate to x. Builds a linear space of x coordinates. Use with dx where x0 is the starting coordinate and dx the step.
xaxis – Sets a reference between this trace’s x coordinates and a 2D cartesian x axis. If “x” (the default value), the x coordinates refer to layout.xaxis. If “x2”, the x coordinates refer to layout.xaxis2, and so on.
xhoverformat – Sets the hover text formatting rulefor x using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display *09~15~23.46*By default the values are formatted using xaxis.hoverformat.
xperiod – Only relevant when the axis type is “date”. Sets the period positioning in milliseconds or “M<n>” on the x axis. Special values in the form of “M<n>” could be used to declare the number of months. In this case n must be a positive integer.
xperiod0 – Only relevant when the axis type is “date”. Sets the base for period positioning in milliseconds or date string on the x0 axis. When x0period is round number of weeks, the x0period0 by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.
xperiodalignment – Only relevant when the axis type is “date”. Sets the alignment of data points on the x axis.
xsrc – Sets the source reference on Chart Studio Cloud for x.
y – Sets the y coordinates.
y0 – Alternate to y. Builds a linear space of y coordinates. Use with dy where y0 is the starting coordinate and dy the step.
yaxis – Sets a reference between this trace’s y coordinates and a 2D cartesian y axis. If “y” (the default value), the y coordinates refer to layout.yaxis. If “y2”, the y coordinates refer to layout.yaxis2, and so on.
yhoverformat – Sets the hover text formatting rulefor y using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display *09~15~23.46*By default the values are formatted using yaxis.hoverformat.
yperiod – Only relevant when the axis type is “date”. Sets the period positioning in milliseconds or “M<n>” on the y axis. Special values in the form of “M<n>” could be used to declare the number of months. In this case n must be a positive integer.
yperiod0 – Only relevant when the axis type is “date”. Sets the base for period positioning in milliseconds or date string on the y0 axis. When y0period is round number of weeks, the y0period0 by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01.
yperiodalignment – Only relevant when the axis type is “date”. Sets the alignment of data points on the y axis.
ysrc – Sets the source reference on Chart Studio Cloud for y.
zorder – Sets the layer on which this trace is displayed, relative to other SVG traces on the same subplot. SVG traces with higher zorder appear in front of those with lower zorder.

Returns

Return type

Waterfall

`plotly.graph_objects`.waterfall¶

plotly.graph_objects.waterfall

class plotly.graph_objects.waterfall.Connector(arg=None, line=None, mode=None, visible=None, **kwargs)¶

property line¶

The ‘line’ property is an instance of Line that may be specified as:

An instance of plotly.graph_objects.waterfall.connector.Line

A dict of string/value properties that will be passed to the Line constructor

Supported dict properties:

color
Sets the line color.

dash
Sets the dash style of lines. Set to a dash type string (“solid”, “dot”, “dash”, “longdash”, “dashdot”, or “longdashdot”) or a dash length list in px (eg “5px,10px,2px,2px”).

width
Sets the line width (in px).

Returns
Return type: plotly.graph_objects.waterfall.connector.Line

property mode¶

Sets the shape of connector lines.

The ‘mode’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘spanning’, ‘between’]

Returns
Return type: Any

property visible¶

Determines if connector lines are drawn.

The ‘visible’ property must be specified as a bool (either True, or False)

Returns
Return type: bool

class plotly.graph_objects.waterfall.Decreasing(arg=None, marker=None, **kwargs)¶

property marker¶

The ‘marker’ property is an instance of Marker that may be specified as:

An instance of plotly.graph_objects.waterfall.decreasing.Marker

A dict of string/value properties that will be passed to the Marker constructor

Supported dict properties:

color
Sets the marker color of all decreasing values.

line
plotly.graph_objects.waterfall.decreasi ng.marker.Line instance or dict with compatible properties

Returns
Return type: plotly.graph_objects.waterfall.decreasing.Marker

class plotly.graph_objects.waterfall.Hoverlabel(arg=None, align=None, alignsrc=None, bgcolor=None, bgcolorsrc=None, bordercolor=None, bordercolorsrc=None, font=None, namelength=None, namelengthsrc=None, **kwargs)¶

property align¶

Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines

The ‘align’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘left’, ‘right’, ‘auto’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property alignsrc¶

Sets the source reference on Chart Studio Cloud for align.

The ‘alignsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property bgcolor¶

Sets the background color of the hover labels for this trace

The ‘bgcolor’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property bgcolorsrc¶

Sets the source reference on Chart Studio Cloud for bgcolor.

The ‘bgcolorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property bordercolor¶

Sets the border color of the hover labels for this trace.

The ‘bordercolor’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property bordercolorsrc¶

Sets the source reference on Chart Studio Cloud for bordercolor.

The ‘bordercolorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property font¶

Sets the font used in hover labels.

The ‘font’ property is an instance of Font that may be specified as:

An instance of plotly.graph_objects.waterfall.hoverlabel.Font

A dict of string/value properties that will be passed to the Font constructor

Supported dict properties:

color

colorsrc
Sets the source reference on Chart Studio Cloud for color.

family
HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

familysrc
Sets the source reference on Chart Studio Cloud for family.

lineposition
Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

linepositionsrc
Sets the source reference on Chart Studio Cloud for lineposition.

shadow
Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en- US/docs/Web/CSS/text-shadow for additional options.

shadowsrc
Sets the source reference on Chart Studio Cloud for shadow.

size

sizesrc
Sets the source reference on Chart Studio Cloud for size.

style
Sets whether a font should be styled with a normal or italic face from its family.

stylesrc
Sets the source reference on Chart Studio Cloud for style.

textcase
Sets capitalization of text. It can be used to make text appear in all-uppercase or all- lowercase, or with each word capitalized.

textcasesrc
Sets the source reference on Chart Studio Cloud for textcase.

variant
Sets the variant of the font.

variantsrc
Sets the source reference on Chart Studio Cloud for variant.

weight
Sets the weight (or boldness) of the font.

weightsrc
Sets the source reference on Chart Studio Cloud for weight.

Returns
Return type: plotly.graph_objects.waterfall.hoverlabel.Font

property namelength¶

Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to namelength - 3 characters and add an ellipsis.

The ‘namelength’ property is a integer and may be specified as:

An int (or float that will be cast to an int) in the interval [-1, 9223372036854775807]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|numpy.ndarray

property namelengthsrc¶

Sets the source reference on Chart Studio Cloud for namelength.

The ‘namelengthsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

class plotly.graph_objects.waterfall.Increasing(arg=None, marker=None, **kwargs)¶

property marker¶

The ‘marker’ property is an instance of Marker that may be specified as:

An instance of plotly.graph_objects.waterfall.increasing.Marker

A dict of string/value properties that will be passed to the Marker constructor

Supported dict properties:

color
Sets the marker color of all increasing values.

line
plotly.graph_objects.waterfall.increasi ng.marker.Line instance or dict with compatible properties

Returns
Return type: plotly.graph_objects.waterfall.increasing.Marker

class plotly.graph_objects.waterfall.Insidetextfont(arg=None, color=None, colorsrc=None, family=None, familysrc=None, lineposition=None, linepositionsrc=None, shadow=None, shadowsrc=None, size=None, sizesrc=None, style=None, stylesrc=None, textcase=None, textcasesrc=None, variant=None, variantsrc=None, weight=None, weightsrc=None, **kwargs)¶

property color¶

The ‘color’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property colorsrc¶

Sets the source reference on Chart Studio Cloud for color.

The ‘colorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property family¶

HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart- studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

The ‘family’ property is a string and must be specified as:

A non-empty string
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: str|numpy.ndarray

property familysrc¶

Sets the source reference on Chart Studio Cloud for family.

The ‘familysrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property lineposition¶

Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

The ‘lineposition’ property is a flaglist and may be specified as a string containing:

Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)

A list or array of the above

Returns
Return type: Any|numpy.ndarray

property linepositionsrc¶

Sets the source reference on Chart Studio Cloud for lineposition.

The ‘linepositionsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property shadow¶

Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

The ‘shadow’ property is a string and must be specified as:

A string
A number that will be converted to a string
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: str|numpy.ndarray

property shadowsrc¶

Sets the source reference on Chart Studio Cloud for shadow.

The ‘shadowsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property size¶

The ‘size’ property is a number and may be specified as:

An int or float in the interval [1, inf]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|float|numpy.ndarray

property sizesrc¶

Sets the source reference on Chart Studio Cloud for size.

The ‘sizesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property style¶

Sets whether a font should be styled with a normal or italic face from its family.

The ‘style’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘italic’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property stylesrc¶

Sets the source reference on Chart Studio Cloud for style.

The ‘stylesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property textcase¶

Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

The ‘textcase’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘word caps’, ‘upper’, ‘lower’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property textcasesrc¶

Sets the source reference on Chart Studio Cloud for textcase.

The ‘textcasesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property variant¶

Sets the variant of the font.

The ‘variant’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property variantsrc¶

Sets the source reference on Chart Studio Cloud for variant.

The ‘variantsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property weight¶

Sets the weight (or boldness) of the font.

The ‘weight’ property is a integer and may be specified as:

An int (or float that will be cast to an int) in the interval [1, 1000] OR exactly one of [‘normal’, ‘bold’] (e.g. ‘bold’)
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|numpy.ndarray

property weightsrc¶

Sets the source reference on Chart Studio Cloud for weight.

The ‘weightsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

class plotly.graph_objects.waterfall.Legendgrouptitle(arg=None, font=None, text=None, **kwargs)¶

property font¶

Sets this legend group’s title font.

The ‘font’ property is an instance of Font that may be specified as:

An instance of plotly.graph_objects.waterfall.legendgrouptitle.Font

A dict of string/value properties that will be passed to the Font constructor

Supported dict properties:

color

family
HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

lineposition
Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

shadow
Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en- US/docs/Web/CSS/text-shadow for additional options.

size

style
Sets whether a font should be styled with a normal or italic face from its family.

textcase
Sets capitalization of text. It can be used to make text appear in all-uppercase or all- lowercase, or with each word capitalized.

variant
Sets the variant of the font.

weight
Sets the weight (or boldness) of the font.

Returns
Return type: plotly.graph_objects.waterfall.legendgrouptitle.Font

property text¶

Sets the title of the legend group.

The ‘text’ property is a string and must be specified as:

A string
A number that will be converted to a string

Returns
Return type: str

class plotly.graph_objects.waterfall.Outsidetextfont(arg=None, color=None, colorsrc=None, family=None, familysrc=None, lineposition=None, linepositionsrc=None, shadow=None, shadowsrc=None, size=None, sizesrc=None, style=None, stylesrc=None, textcase=None, textcasesrc=None, variant=None, variantsrc=None, weight=None, weightsrc=None, **kwargs)¶

property color¶

The ‘color’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property colorsrc¶

Sets the source reference on Chart Studio Cloud for color.

The ‘colorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property family¶

The ‘family’ property is a string and must be specified as:

A non-empty string
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: str|numpy.ndarray

property familysrc¶

Sets the source reference on Chart Studio Cloud for family.

The ‘familysrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property lineposition¶

Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

The ‘lineposition’ property is a flaglist and may be specified as a string containing:

Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)

A list or array of the above

Returns
Return type: Any|numpy.ndarray

property linepositionsrc¶

Sets the source reference on Chart Studio Cloud for lineposition.

The ‘linepositionsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property shadow¶

The ‘shadow’ property is a string and must be specified as:

A string
A number that will be converted to a string
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: str|numpy.ndarray

property shadowsrc¶

Sets the source reference on Chart Studio Cloud for shadow.

The ‘shadowsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property size¶

The ‘size’ property is a number and may be specified as:

An int or float in the interval [1, inf]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|float|numpy.ndarray

property sizesrc¶

Sets the source reference on Chart Studio Cloud for size.

The ‘sizesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property style¶

Sets whether a font should be styled with a normal or italic face from its family.

The ‘style’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘italic’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property stylesrc¶

Sets the source reference on Chart Studio Cloud for style.

The ‘stylesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property textcase¶

Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

The ‘textcase’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘word caps’, ‘upper’, ‘lower’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property textcasesrc¶

Sets the source reference on Chart Studio Cloud for textcase.

The ‘textcasesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property variant¶

Sets the variant of the font.

The ‘variant’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property variantsrc¶

Sets the source reference on Chart Studio Cloud for variant.

The ‘variantsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property weight¶

Sets the weight (or boldness) of the font.

The ‘weight’ property is a integer and may be specified as:

An int (or float that will be cast to an int) in the interval [1, 1000] OR exactly one of [‘normal’, ‘bold’] (e.g. ‘bold’)
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|numpy.ndarray

property weightsrc¶

Sets the source reference on Chart Studio Cloud for weight.

The ‘weightsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

class plotly.graph_objects.waterfall.Stream(arg=None, maxpoints=None, token=None, **kwargs)¶

property maxpoints¶

Sets the maximum number of points to keep on the plots from an incoming stream. If maxpoints is set to 50, only the newest 50 points will be displayed on the plot.

The ‘maxpoints’ property is a number and may be specified as:

An int or float in the interval [0, 10000]

Returns
Return type: int|float

property token¶

The stream id number links a data trace on a plot with a stream. See https://chart-studio.plotly.com/settings for more details.

The ‘token’ property is a string and must be specified as:

A non-empty string

Returns
Return type: str

class plotly.graph_objects.waterfall.Textfont(arg=None, color=None, colorsrc=None, family=None, familysrc=None, lineposition=None, linepositionsrc=None, shadow=None, shadowsrc=None, size=None, sizesrc=None, style=None, stylesrc=None, textcase=None, textcasesrc=None, variant=None, variantsrc=None, weight=None, weightsrc=None, **kwargs)¶

property color¶

The ‘color’ property is a color and may be specified as:

A hex string (e.g. ‘#ff0000’)
An rgb/rgba string (e.g. ‘rgb(255,0,0)’)
An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)
An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)
A named CSS color:
aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen
A list or array of any of the above

Returns
Return type: str|numpy.ndarray

property colorsrc¶

Sets the source reference on Chart Studio Cloud for color.

The ‘colorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property family¶

The ‘family’ property is a string and must be specified as:

A non-empty string
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: str|numpy.ndarray

property familysrc¶

Sets the source reference on Chart Studio Cloud for family.

The ‘familysrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property lineposition¶

Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

The ‘lineposition’ property is a flaglist and may be specified as a string containing:

Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)

A list or array of the above

Returns
Return type: Any|numpy.ndarray

property linepositionsrc¶

Sets the source reference on Chart Studio Cloud for lineposition.

The ‘linepositionsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property shadow¶

The ‘shadow’ property is a string and must be specified as:

A string
A number that will be converted to a string
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: str|numpy.ndarray

property shadowsrc¶

Sets the source reference on Chart Studio Cloud for shadow.

The ‘shadowsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property size¶

The ‘size’ property is a number and may be specified as:

An int or float in the interval [1, inf]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|float|numpy.ndarray

property sizesrc¶

Sets the source reference on Chart Studio Cloud for size.

The ‘sizesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property style¶

Sets whether a font should be styled with a normal or italic face from its family.

The ‘style’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘italic’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property stylesrc¶

Sets the source reference on Chart Studio Cloud for style.

The ‘stylesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property textcase¶

Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

The ‘textcase’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘word caps’, ‘upper’, ‘lower’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property textcasesrc¶

Sets the source reference on Chart Studio Cloud for textcase.

The ‘textcasesrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property variant¶

Sets the variant of the font.

The ‘variant’ property is an enumeration that may be specified as:

One of the following enumeration values:
[‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: Any|numpy.ndarray

property variantsrc¶

Sets the source reference on Chart Studio Cloud for variant.

The ‘variantsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

property weight¶

Sets the weight (or boldness) of the font.

The ‘weight’ property is a integer and may be specified as:

An int (or float that will be cast to an int) in the interval [1, 1000] OR exactly one of [‘normal’, ‘bold’] (e.g. ‘bold’)
A tuple, list, or one-dimensional numpy array of the above

Returns
Return type: int|numpy.ndarray

property weightsrc¶

Sets the source reference on Chart Studio Cloud for weight.

The ‘weightsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns
Return type: str

class plotly.graph_objects.waterfall.Totals(arg=None, marker=None, **kwargs)¶

property marker¶

The ‘marker’ property is an instance of Marker that may be specified as:

An instance of plotly.graph_objects.waterfall.totals.Marker

A dict of string/value properties that will be passed to the Marker constructor

Supported dict properties:

color
Sets the marker color of all intermediate sums and total values.

line
plotly.graph_objects.waterfall.totals.m arker.Line instance or dict with compatible properties

Returns
Return type: plotly.graph_objects.waterfall.totals.Marker

plotly.graph_objects.Waterfall¶

plotly.graph_objects.waterfall¶

`plotly.graph_objects`.Waterfall¶

`plotly.graph_objects`.waterfall¶