plotly.graph_objects.parcats package

class plotly.graph_objects.parcats.Dimension(arg=None, categoryarray=None, categoryarraysrc=None, categoryorder=None, displayindex=None, label=None, ticktext=None, ticktextsrc=None, values=None, valuessrc=None, visible=None, **kwargs)

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property categoryarray

Sets the order in which categories in this dimension appear. Only has an effect if categoryorder is set to “array”. Used with categoryorder.

The ‘categoryarray’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property categoryarraysrc

Sets the source reference on Chart Studio Cloud for categoryarray.

The ‘categoryarraysrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns

Return type

str

property categoryorder

Specifies the ordering logic for the categories in the dimension. By default, plotly uses “trace”, which specifies the order that is present in the data supplied. Set categoryorder to category ascending or category descending if order should be determined by the alphanumerical order of the category names. Set categoryorder to “array” to derive the ordering from the attribute categoryarray. If a category is not found in the categoryarray array, the sorting behavior for that attribute will be identical to the “trace” mode. The unspecified categories will follow the categories in categoryarray.

The ‘categoryorder’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘trace’, ‘category ascending’, ‘category descending’, ‘array’]

Returns

Return type

Any

property displayindex

The display index of dimension, from left to right, zero indexed, defaults to dimension index.

The ‘displayindex’ property is a integer and may be specified as:

  • An int (or float that will be cast to an int)

Returns

Return type

int

property label

The shown name of the dimension.

The ‘label’ property is a string and must be specified as:

  • A string

  • A number that will be converted to a string

Returns

Return type

str

property ticktext

Sets alternative tick labels for the categories in this dimension. Only has an effect if categoryorder is set to “array”. Should be an array the same length as categoryarray Used with categoryorder.

The ‘ticktext’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property ticktextsrc

Sets the source reference on Chart Studio Cloud for ticktext.

The ‘ticktextsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns

Return type

str

property values

Dimension values. values[n] represents the category value of the n`th point in the dataset, therefore the `values vector for all dimensions must be the same (longer vectors will be truncated).

The ‘values’ property is an array that may be specified as a tuple, list, numpy array, or pandas Series

Returns

Return type

numpy.ndarray

property valuessrc

Sets the source reference on Chart Studio Cloud for values.

The ‘valuessrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns

Return type

str

property visible

Shows the dimension when set to true (the default). Hides the dimension for false.

The ‘visible’ property must be specified as a bool (either True, or False)

Returns

Return type

bool

class plotly.graph_objects.parcats.Domain(arg=None, column=None, row=None, x=None, y=None, **kwargs)

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property column

If there is a layout grid, use the domain for this column in the grid for this parcats trace .

The ‘column’ property is a integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]

Returns

Return type

int

property row

If there is a layout grid, use the domain for this row in the grid for this parcats trace .

The ‘row’ property is a integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [0, 9223372036854775807]

Returns

Return type

int

property x
Sets the horizontal domain of this parcats trace (in plot

fraction).

The ‘x’ property is an info array that may be specified as:

  • a list or tuple of 2 elements where:

  1. The ‘x[0]’ property is a number and may be specified as:

    • An int or float in the interval [0, 1]

  2. The ‘x[1]’ property is a number and may be specified as:

    • An int or float in the interval [0, 1]

    list

property y
Sets the vertical domain of this parcats trace (in plot

fraction).

The ‘y’ property is an info array that may be specified as:

  • a list or tuple of 2 elements where:

  1. The ‘y[0]’ property is a number and may be specified as:

    • An int or float in the interval [0, 1]

  2. The ‘y[1]’ property is a number and may be specified as:

    • An int or float in the interval [0, 1]

    list

class plotly.graph_objects.parcats.Labelfont(arg=None, color=None, family=None, lineposition=None, shadow=None, size=None, style=None, textcase=None, variant=None, weight=None, **kwargs)

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property color
The ‘color’ property is a color and may be specified as:

  • A hex string (e.g. ‘#ff0000’)

  • An rgb/rgba string (e.g. ‘rgb(255,0,0)’)

  • An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)

  • An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)

  • A named CSS color:

    aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen

Returns

Return type

str

property family

HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart- studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

The ‘family’ property is a string and must be specified as:

  • A non-empty string

Returns

Return type

str

property lineposition

Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

The ‘lineposition’ property is a flaglist and may be specified as a string containing:

  • Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)

Returns

Return type

Any

property shadow

Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

The ‘shadow’ property is a string and must be specified as:

  • A string

  • A number that will be converted to a string

Returns

Return type

str

property size
The ‘size’ property is a number and may be specified as:

  • An int or float in the interval [1, inf]

Returns

Return type

int|float

property style

Sets whether a font should be styled with a normal or italic face from its family.

The ‘style’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘normal’, ‘italic’]

Returns

Return type

Any

property textcase

Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

The ‘textcase’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘normal’, ‘word caps’, ‘upper’, ‘lower’]

Returns

Return type

Any

property variant

Sets the variant of the font.

The ‘variant’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]

Returns

Return type

Any

property weight

Sets the weight (or boldness) of the font.

The ‘weight’ property is a integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [1, 1000] OR exactly one of [‘normal’, ‘bold’] (e.g. ‘bold’)

Returns

Return type

int

class plotly.graph_objects.parcats.Legendgrouptitle(arg=None, font=None, text=None, **kwargs)

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property font

Sets this legend group’s title font.

The ‘font’ property is an instance of Font that may be specified as:

  • An instance of plotly.graph_objects.parcats.legendgrouptitle.Font

  • A dict of string/value properties that will be passed to the Font constructor

    Supported dict properties:

    color

    family

    HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

    lineposition

    Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

    shadow

    Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en- US/docs/Web/CSS/text-shadow for additional options.

    size

    style

    Sets whether a font should be styled with a normal or italic face from its family.

    textcase

    Sets capitalization of text. It can be used to make text appear in all-uppercase or all- lowercase, or with each word capitalized.

    variant

    Sets the variant of the font.

    weight

    Sets the weight (or boldness) of the font.

Returns

Return type

plotly.graph_objects.parcats.legendgrouptitle.Font

property text

Sets the title of the legend group.

The ‘text’ property is a string and must be specified as:

  • A string

  • A number that will be converted to a string

Returns

Return type

str

class plotly.graph_objects.parcats.Line(arg=None, autocolorscale=None, cauto=None, cmax=None, cmid=None, cmin=None, color=None, coloraxis=None, colorbar=None, colorscale=None, colorsrc=None, hovertemplate=None, reversescale=None, shape=None, showscale=None, **kwargs)

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property autocolorscale

Determines whether the colorscale is a default palette (autocolorscale: true) or the palette determined by line.colorscale. Has an effect only if in line.color is set to a numerical array. In case colorscale is unspecified or autocolorscale is true, the default palette will be chosen according to whether numbers in the color array are all positive, all negative or mixed.

The ‘autocolorscale’ property must be specified as a bool (either True, or False)

Returns

Return type

bool

property cauto

Determines whether or not the color domain is computed with respect to the input data (here in line.color) or the bounds set in line.cmin and line.cmax Has an effect only if in line.color is set to a numerical array. Defaults to false when line.cmin and line.cmax are set by the user.

The ‘cauto’ property must be specified as a bool (either True, or False)

Returns

Return type

bool

property cmax

Sets the upper bound of the color domain. Has an effect only if in line.color is set to a numerical array. Value should have the same units as in line.color and if set, line.cmin must be set as well.

The ‘cmax’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property cmid

Sets the mid-point of the color domain by scaling line.cmin and/or line.cmax to be equidistant to this point. Has an effect only if in line.color is set to a numerical array. Value should have the same units as in line.color. Has no effect when line.cauto is false.

The ‘cmid’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property cmin

Sets the lower bound of the color domain. Has an effect only if in line.color is set to a numerical array. Value should have the same units as in line.color and if set, line.cmax must be set as well.

The ‘cmin’ property is a number and may be specified as:

  • An int or float

Returns

Return type

int|float

property color

Sets the line color. It accepts either a specific color or an array of numbers that are mapped to the colorscale relative to the max and min values of the array or relative to line.cmin and line.cmax if set.

The ‘color’ property is a color and may be specified as:

  • A hex string (e.g. ‘#ff0000’)

  • An rgb/rgba string (e.g. ‘rgb(255,0,0)’)

  • An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)

  • An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)

  • A named CSS color:

    aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen

  • A number that will be interpreted as a color according to parcats.line.colorscale

  • A list or array of any of the above

Returns

Return type

str|numpy.ndarray

property coloraxis

Sets a reference to a shared color axis. References to these shared color axes are “coloraxis”, “coloraxis2”, “coloraxis3”, etc. Settings for these shared color axes are set in the layout, under layout.coloraxis, layout.coloraxis2, etc. Note that multiple color scales can be linked to the same color axis.

The ‘coloraxis’ property is an identifier of a particular subplot, of type ‘coloraxis’, that may be specified as the string ‘coloraxis’ optionally followed by an integer >= 1 (e.g. ‘coloraxis’, ‘coloraxis1’, ‘coloraxis2’, ‘coloraxis3’, etc.)

Returns

Return type

str

property colorbar

The ‘colorbar’ property is an instance of ColorBar that may be specified as:

  • An instance of plotly.graph_objects.parcats.line.ColorBar

  • A dict of string/value properties that will be passed to the ColorBar constructor

    Supported dict properties:

    bgcolor

    Sets the color of padded area.

    bordercolor

    Sets the axis line color.

    borderwidth

    Sets the width (in px) or the border enclosing this color bar.

    dtick

    Sets the step in-between ticks on this axis. Use with tick0. Must be a positive number, or special strings available to “log” and “date” axes. If the axis type is “log”, then ticks are set every 10^(n*dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, … set dtick to 1. To set tick marks at 1, 100, 10000, … set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, … set dtick to log_10(5), or 0.69897000433. “log” has several special values; “L<f>”, where f is a positive number, gives ticks linearly spaced in value (but not position). For example tick0 = 0.1, dtick = “L0.5” will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use “D1” (all digits) or “D2” (only 2 and 5). tick0 is ignored for “D1” and “D2”. If the axis type is “date”, then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set dtick to 86400000.0. “date” also has special values “M<n>” gives ticks spaced by a number of months. n must be a positive integer. To set ticks on the 15th of every third month, set tick0 to “2000-01-15” and dtick to “M3”. To set ticks every 4 years, set dtick to “M48”

    exponentformat

    Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If “none”, it appears as 1,000,000,000. If “e”, 1e+9. If “E”, 1E+9. If “power”, 1x10^9 (with 9 in a super script). If “SI”, 1G. If “B”, 1B.

    labelalias

    Replacement text for specific tick or hover labels. For example using {US: ‘USA’, CA: ‘Canada’} changes US to USA and CA to Canada. The labels we would have shown must match the keys exactly, after adding any tickprefix or ticksuffix. For negative numbers the minus sign symbol used (U+2212) is wider than the regular ascii dash. That means you need to use −1 instead of -1. labelalias can be used with any axis type, and both keys (if needed) and values (if desired) can include html-like tags or MathJax.

    len

    Sets the length of the color bar This measure excludes the padding of both ends. That is, the color bar length is this length minus the padding on both ends.

    lenmode

    Determines whether this color bar’s length (i.e. the measure in the color variation direction) is set in units of plot “fraction” or in *pixels. Use len to set the value.

    minexponent

    Hide SI prefix for 10^n if |n| is below this number. This only has an effect when tickformat is “SI” or “B”.

    nticks

    Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to nticks. Has an effect only if tickmode is set to “auto”.

    orientation

    Sets the orientation of the colorbar.

    outlinecolor

    Sets the axis line color.

    outlinewidth

    Sets the width (in px) of the axis line.

    separatethousands

    If “true”, even 4-digit integers are separated

    showexponent

    If “all”, all exponents are shown besides their significands. If “first”, only the exponent of the first tick is shown. If “last”, only the exponent of the last tick is shown. If “none”, no exponents appear.

    showticklabels

    Determines whether or not the tick labels are drawn.

    showtickprefix

    If “all”, all tick labels are displayed with a prefix. If “first”, only the first tick is displayed with a prefix. If “last”, only the last tick is displayed with a suffix. If “none”, tick prefixes are hidden.

    showticksuffix

    Same as showtickprefix but for tick suffixes.

    thickness

    Sets the thickness of the color bar This measure excludes the size of the padding, ticks and labels.

    thicknessmode

    Determines whether this color bar’s thickness (i.e. the measure in the constant color direction) is set in units of plot “fraction” or in “pixels”. Use thickness to set the value.

    tick0

    Sets the placement of the first tick on this axis. Use with dtick. If the axis type is “log”, then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the tick0 to 2) except when dtick`=*L<f>* (see `dtick for more info). If the axis type is “date”, it should be a date string, like date data. If the axis type is “category”, it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears.

    tickangle

    Sets the angle of the tick labels with respect to the horizontal. For example, a tickangle of -90 draws the tick labels vertically.

    tickcolor

    Sets the tick color.

    tickfont

    Sets the color bar’s tick label font

    tickformat

    Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: h ttps://github.com/d3/d3-format/tree/v1.4.5#d3- format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3’s date formatter: “%h” for half of the year as a decimal number as well as “%{n}f” for fractional seconds with n digits. For example, 2016-10-13 09:15:23.456 with tickformat “%H~%M~%S.%2f” would display “09~15~23.46”

    tickformatstops

    A tuple of plotly.graph_objects.parcats .line.colorbar.Tickformatstop instances or dicts with compatible properties

    tickformatstopdefaults

    When used in a template (as layout.template.dat a.parcats.line.colorbar.tickformatstopdefaults) , sets the default property values to use for elements of parcats.line.colorbar.tickformatstops

    ticklabeloverflow

    Determines how we handle tick labels that would overflow either the graph div or the domain of the axis. The default value for inside tick labels is hide past domain. In other cases the default is hide past div.

    ticklabelposition

    Determines where tick labels are drawn relative to the ticks. Left and right options are used when orientation is “h”, top and bottom when orientation is “v”.

    ticklabelstep

    Sets the spacing between tick labels as compared to the spacing between ticks. A value of 1 (default) means each tick gets a label. A value of 2 means shows every 2nd label. A larger value n means only every nth tick is labeled. tick0 determines which labels are shown. Not implemented for axes with type “log” or “multicategory”, or when tickmode is “array”.

    ticklen

    Sets the tick length (in px).

    tickmode

    Sets the tick mode for this axis. If “auto”, the number of ticks is set via nticks. If “linear”, the placement of the ticks is determined by a starting position tick0 and a tick step dtick (“linear” is the default value if tick0 and dtick are provided). If “array”, the placement of the ticks is set via tickvals and the tick text is ticktext. (“array” is the default value if tickvals is provided).

    tickprefix

    Sets a tick label prefix.

    ticks

    Determines whether ticks are drawn or not. If “”, this axis’ ticks are not drawn. If “outside” (“inside”), this axis’ are drawn outside (inside) the axis lines.

    ticksuffix

    Sets a tick label suffix.

    ticktext

    Sets the text displayed at the ticks position via tickvals. Only has an effect if tickmode is set to “array”. Used with tickvals.

    ticktextsrc

    Sets the source reference on Chart Studio Cloud for ticktext.

    tickvals

    Sets the values at which ticks on this axis appear. Only has an effect if tickmode is set to “array”. Used with ticktext.

    tickvalssrc

    Sets the source reference on Chart Studio Cloud for tickvals.

    tickwidth

    Sets the tick width (in px).

    title

    plotly.graph_objects.parcats.line.color bar.Title instance or dict with compatible properties

    titlefont

    Deprecated: Please use parcats.line.colorbar.title.font instead. Sets this color bar’s title font. Note that the title’s font used to be set by the now deprecated titlefont attribute.

    titleside

    Deprecated: Please use parcats.line.colorbar.title.side instead. Determines the location of color bar’s title with respect to the color bar. Defaults to “top” when orientation if “v” and defaults to “right” when orientation if “h”. Note that the title’s location used to be set by the now deprecated titleside attribute.

    x

    Sets the x position with respect to xref of the color bar (in plot fraction). When xref is “paper”, defaults to 1.02 when orientation is “v” and 0.5 when orientation is “h”. When xref is “container”, defaults to 1 when orientation is “v” and 0.5 when orientation is “h”. Must be between 0 and 1 if xref is “container” and between “-2” and 3 if xref is “paper”.

    xanchor

    Sets this color bar’s horizontal position anchor. This anchor binds the x position to the “left”, “center” or “right” of the color bar. Defaults to “left” when orientation is “v” and “center” when orientation is “h”.

    xpad

    Sets the amount of padding (in px) along the x direction.

    xref

    Sets the container x refers to. “container” spans the entire width of the plot. “paper” refers to the width of the plotting area only.

    y

    Sets the y position with respect to yref of the color bar (in plot fraction). When yref is “paper”, defaults to 0.5 when orientation is “v” and 1.02 when orientation is “h”. When yref is “container”, defaults to 0.5 when orientation is “v” and 1 when orientation is “h”. Must be between 0 and 1 if yref is “container” and between “-2” and 3 if yref is “paper”.

    yanchor

    Sets this color bar’s vertical position anchor This anchor binds the y position to the “top”, “middle” or “bottom” of the color bar. Defaults to “middle” when orientation is “v” and “bottom” when orientation is “h”.

    ypad

    Sets the amount of padding (in px) along the y direction.

    yref

    Sets the container y refers to. “container” spans the entire height of the plot. “paper” refers to the height of the plotting area only.

Returns

Return type

plotly.graph_objects.parcats.line.ColorBar

property colorscale

Sets the colorscale. Has an effect only if in line.color is set to a numerical array. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, [[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]. To control the bounds of the colorscale in color space, use line.cmin and line.cmax. Alternatively, colorscale may be a palette name string of the following list: Blackbody,Bluered, Blues,Cividis,Earth,Electric,Greens,Greys,Hot,Jet,Picnic,Portla nd,Rainbow,RdBu,Reds,Viridis,YlGnBu,YlOrRd.

The ‘colorscale’ property is a colorscale and may be specified as:

  • A list of colors that will be spaced evenly to create the colorscale. Many predefined colorscale lists are included in the sequential, diverging, and cyclical modules in the plotly.colors package.

  • A list of 2-element lists where the first element is the normalized color level value (starting at 0 and ending at 1), and the second item is a valid color string. (e.g. [[0, ‘green’], [0.5, ‘red’], [1.0, ‘rgb(0, 0, 255)’]])

  • One of the following named colorscales:
    [‘aggrnyl’, ‘agsunset’, ‘algae’, ‘amp’, ‘armyrose’, ‘balance’,

    ‘blackbody’, ‘bluered’, ‘blues’, ‘blugrn’, ‘bluyl’, ‘brbg’, ‘brwnyl’, ‘bugn’, ‘bupu’, ‘burg’, ‘burgyl’, ‘cividis’, ‘curl’, ‘darkmint’, ‘deep’, ‘delta’, ‘dense’, ‘earth’, ‘edge’, ‘electric’, ‘emrld’, ‘fall’, ‘geyser’, ‘gnbu’, ‘gray’, ‘greens’, ‘greys’, ‘haline’, ‘hot’, ‘hsv’, ‘ice’, ‘icefire’, ‘inferno’, ‘jet’, ‘magenta’, ‘magma’, ‘matter’, ‘mint’, ‘mrybm’, ‘mygbm’, ‘oranges’, ‘orrd’, ‘oryel’, ‘oxy’, ‘peach’, ‘phase’, ‘picnic’, ‘pinkyl’, ‘piyg’, ‘plasma’, ‘plotly3’, ‘portland’, ‘prgn’, ‘pubu’, ‘pubugn’, ‘puor’, ‘purd’, ‘purp’, ‘purples’, ‘purpor’, ‘rainbow’, ‘rdbu’, ‘rdgy’, ‘rdpu’, ‘rdylbu’, ‘rdylgn’, ‘redor’, ‘reds’, ‘solar’, ‘spectral’, ‘speed’, ‘sunset’, ‘sunsetdark’, ‘teal’, ‘tealgrn’, ‘tealrose’, ‘tempo’, ‘temps’, ‘thermal’, ‘tropic’, ‘turbid’, ‘turbo’, ‘twilight’, ‘viridis’, ‘ylgn’, ‘ylgnbu’, ‘ylorbr’, ‘ylorrd’].

    Appending ‘_r’ to a named colorscale reverses it.

Returns

Return type

str

property colorsrc

Sets the source reference on Chart Studio Cloud for color.

The ‘colorsrc’ property must be specified as a string or as a plotly.grid_objs.Column object

Returns

Return type

str

property hovertemplate

Template string used for rendering the information that appear on hover box. Note that this will override hoverinfo. Variables are inserted using %{variable}, for example “y: %{y}” as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, “xother” will be added to those with different x positions from the first point. An underscore before or after “(x|y)other” will add a space on that side, only when this field is shown. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time-format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in hovertemplate are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are arrayOk: true) are available. This value here applies when hovering over lines.Finally, the template string has access to variables count and probability. Anything contained in tag <extra> is displayed in the secondary box, for example “<extra>{fullData.name}</extra>”. To hide the secondary box completely, use an empty tag <extra></extra>.

The ‘hovertemplate’ property is a string and must be specified as:

  • A string

  • A number that will be converted to a string

Returns

Return type

str

property reversescale

Reverses the color mapping if true. Has an effect only if in line.color is set to a numerical array. If true, line.cmin will correspond to the last color in the array and line.cmax will correspond to the first color.

The ‘reversescale’ property must be specified as a bool (either True, or False)

Returns

Return type

bool

property shape

Sets the shape of the paths. If linear, paths are composed of straight lines. If hspline, paths are composed of horizontal curved splines

The ‘shape’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘linear’, ‘hspline’]

Returns

Return type

Any

property showscale

Determines whether or not a colorbar is displayed for this trace. Has an effect only if in line.color is set to a numerical array.

The ‘showscale’ property must be specified as a bool (either True, or False)

Returns

Return type

bool

class plotly.graph_objects.parcats.Stream(arg=None, maxpoints=None, token=None, **kwargs)

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property maxpoints

Sets the maximum number of points to keep on the plots from an incoming stream. If maxpoints is set to 50, only the newest 50 points will be displayed on the plot.

The ‘maxpoints’ property is a number and may be specified as:

  • An int or float in the interval [0, 10000]

Returns

Return type

int|float

property token

The stream id number links a data trace on a plot with a stream. See https://chart-studio.plotly.com/settings for more details.

The ‘token’ property is a string and must be specified as:

  • A non-empty string

Returns

Return type

str

class plotly.graph_objects.parcats.Tickfont(arg=None, color=None, family=None, lineposition=None, shadow=None, size=None, style=None, textcase=None, variant=None, weight=None, **kwargs)

Bases: plotly.basedatatypes.BaseTraceHierarchyType

property color
The ‘color’ property is a color and may be specified as:

  • A hex string (e.g. ‘#ff0000’)

  • An rgb/rgba string (e.g. ‘rgb(255,0,0)’)

  • An hsl/hsla string (e.g. ‘hsl(0,100%,50%)’)

  • An hsv/hsva string (e.g. ‘hsv(0,100%,100%)’)

  • A named CSS color:

    aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen

Returns

Return type

str

property family

HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren’t available on the system. The Chart Studio Cloud (at https://chart- studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include “Arial”, “Balto”, “Courier New”, “Droid Sans”, “Droid Serif”, “Droid Sans Mono”, “Gravitas One”, “Old Standard TT”, “Open Sans”, “Overpass”, “PT Sans Narrow”, “Raleway”, “Times New Roman”.

The ‘family’ property is a string and must be specified as:

  • A non-empty string

Returns

Return type

str

property lineposition

Sets the kind of decoration line(s) with text, such as an “under”, “over” or “through” as well as combinations e.g. “under+over”, etc.

The ‘lineposition’ property is a flaglist and may be specified as a string containing:

  • Any combination of [‘under’, ‘over’, ‘through’] joined with ‘+’ characters (e.g. ‘under+over’) OR exactly one of [‘none’] (e.g. ‘none’)

Returns

Return type

Any

property shadow

Sets the shape and color of the shadow behind text. “auto” places minimal shadow and applies contrast text font color. See https://developer.mozilla.org/en-US/docs/Web/CSS/text-shadow for additional options.

The ‘shadow’ property is a string and must be specified as:

  • A string

  • A number that will be converted to a string

Returns

Return type

str

property size
The ‘size’ property is a number and may be specified as:

  • An int or float in the interval [1, inf]

Returns

Return type

int|float

property style

Sets whether a font should be styled with a normal or italic face from its family.

The ‘style’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘normal’, ‘italic’]

Returns

Return type

Any

property textcase

Sets capitalization of text. It can be used to make text appear in all-uppercase or all-lowercase, or with each word capitalized.

The ‘textcase’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘normal’, ‘word caps’, ‘upper’, ‘lower’]

Returns

Return type

Any

property variant

Sets the variant of the font.

The ‘variant’ property is an enumeration that may be specified as:
  • One of the following enumeration values:

    [‘normal’, ‘small-caps’, ‘all-small-caps’, ‘all-petite-caps’, ‘petite-caps’, ‘unicase’]

Returns

Return type

Any

property weight

Sets the weight (or boldness) of the font.

The ‘weight’ property is a integer and may be specified as:

  • An int (or float that will be cast to an int) in the interval [1, 1000] OR exactly one of [‘normal’, ‘bold’] (e.g. ‘bold’)

Returns

Return type

int